Hot deformation behavior of spray-deposited Al-Zn-Mg-Cu alloy

被引：47
作者：
Jia, Yandong [1 ]
Cao, Fuyang [1 ]
Guo, Shu [1 ]
Ma, Pan [1 ]
Liu, Jingshun [1 ]
Sun, Jianfei [1 ]
机构：
[1] Harbin Inst Technol, Sch Mat Sci & Engn, Harbin 150001, Peoples R China
来源：
MATERIALS & DESIGN | 2014年 / 53卷
基金：
中国国家自然科学基金;
关键词：
Spray-deposited; Aluminum alloy; Hot deformation behavior; HIGH-TEMPERATURE DEFORMATION; 7075; ALUMINUM-ALLOY; FLOW BEHAVIOR; MICROSTRUCTURAL EVOLUTION; CONSTITUTIVE-EQUATIONS; MECHANICAL-PROPERTIES; ELEVATED-TEMPERATURE; PROCESSING MAPS; HEAT-TREATMENT; TIAL ALLOY;
D O I：
10.1016/j.matdes.2013.06.053
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The flow behavior of spray-deposited Al-10.21Zn-2.76Mg-1.45Cu-0.16Zr (wt.%) alloy has been systematically investigated by thermal compression tests with temperature and strain rate ranging from 613 K to 733 K and 0.001-1 s(-1), respectively. Microstructural observations revealed that the average grain size of spray-deposited alloy was below 25 mu m due to the high cooling rate. Both relatively high temperature and low strain rate could promote the formation of dynamic recrystallization (DRX). The stress level of the alloy decreased with increasing deformation temperature and decreasing strain rate, which could be characterized by a Zener-Hollomon parameter in the hyperbolic-sine equation. Furthermore, the strain-dependent constitutive equation could lead to a good agreement between the calculated and measured flow stresses in the elevated temperature range for spray-deposited alloy. The deformation activation energy for spray-deposited alloy was relatively lower than that of the as-cast alloy owing to ultrafine grains and high supersaturated solid solubility. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码：79 / 85
页数：7
相关论文
共 34 条
[1]   Flow softening behavior during dynamic recrystallization in Mg-3Al-1Zn magnesium alloy [J].
Bhattacharya, R. ;
Wynne, B. P. ;
Rainforth, W. M. .
SCRIPTA MATERIALIA, 2012, 67 (03) :277-280
[2]   Enhanced grain refinement in AA7050 Al alloy by deformation-induced precipitation [J].
Cai, Yuanhua ;
Lang, Yujing ;
Cao, Lingyong ;
Zhang, Jishan .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 549 :100-104
[3]   COMPARATIVE HOT WORKABILITY OF 7012-ALLOY AND 7075-ALLOY AFTER DIFFERENT PRETREATMENTS [J].
CERRI, E ;
EVANGELISTA, E ;
FORCELLESE, A ;
MCQUEEN, HJ .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1995, 197 (02) :181-198
[4]   Deformation and dynamic recrystallization behavior of a high Nb containing TiAl alloy [J].
Cheng, Liang ;
Chang, Hui ;
Tang, Bin ;
Kou, Hongchao ;
Li, Jinshan .
JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 552 :363-369
[5]   Effect of heat treatment and stress relaxation in 7075 aluminum alloy [J].
Choudhry, M. Arshad ;
Ashraf, Muhammad .
JOURNAL OF ALLOYS AND COMPOUNDS, 2007, 437 (1-2) :113-116
[6]   Deformation behavior of spray-formed hypereutectic Al-Si alloys [J].
Cui, C. ;
Schulz, A. ;
Epp, J. ;
Zoch, H. W. .
JOURNAL OF MATERIALS SCIENCE, 2010, 45 (10) :2798-2807
[7]   A new way to cast high-alloyed Al-Zn-Mg-Cu-Zr for super-high strength and toughness [J].
Dong, J ;
Cui, JZ ;
Fu, FX ;
Zhao, ZH ;
Zhuo, YB .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 171 (03) :399-404
[8]   The microstructural evolution of an Al-Zn-Mg-Cu alloy during homogenization [J].
Fan, XG ;
Jiang, DM ;
Meng, QC ;
Zhong, L .
MATERIALS LETTERS, 2006, 60 (12) :1475-1479
[9]   Deformation behavior and microstructure evolution of 7050 aluminum alloy during high temperature deformation [J].
Hu, H. E. ;
Zhen, L. ;
Yang, L. ;
Shao, W. Z. ;
Zhang, B. Y. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 488 (1-2) :64-71
[10]   Influence of second phases on mechanical properties of spray-deposited Al-Zn-Mg-Cu alloy [J].
Jia, Yandong ;
Cao, Fuyang ;
Ning, Zhiliang ;
Guo, Shu ;
Ma, Pan ;
Sun, Jianfei .
MATERIALS & DESIGN, 2012, 40 :536-540
1234