Solderability, IMC evolution, and shear behavior of low-Ag Sn0.7Ag0.5Cu-BiNi/Cu solder joint

被引：36

作者：

Liu, Yang ^{[1
]}

Sun, Fenglian ^{[1
]}

Zhang, Hongwu ^{[1
]}

Zou, Pengfei ^{[1
]}

机构：

[1] Harbin Univ Sci & Technol, Sch Mat Sci & Engn, Harbin 150040, Peoples R China

来源：

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS | 2012年 / 23卷 / 09期

基金：

中国国家自然科学基金;

关键词：

LEAD-FREE SOLDERS; TENSILE PROPERTIES; CU; ALLOY; RELIABILITY; PERFORMANCE; ADDITIONS; BI;

D O I：

10.1007/s10854-012-0649-1

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

The solderability, intermetallic compounds (IMC) evolution, and shear behavior of the low-Ag Sn0.7Ag0.5Cu-3.5Bi-0.05Ni (SAC0705-BiNi)/Cu solder joint was investigated by comparing with Sn0.7Ag0.5Cu (SAC0705)/Cu and Sn3.0Ag0.5Cu (SAC305)/Cu solder joints. Experimental results demonstrated that the melting temperature of Sn0.7Ag0.5Cu-BiNi solder alloy was lower than that of SAC0705 and SAC305 solder. But the melting range of Sn0.7Ag0.5Cu-BiNi was wider. Compared with the other two kinds of alloys, SAC0705-BiNi showed the best wettability. SAC0705/Cu, SAC0705-BiNi/Cu, and SAC305 solder joints appeared similar IMC morphologies and grain size at the beginning of soldering, but evolved to different appearance as the soldering process proceeded. The growth rate of the IMC grains in SAC0705-BiNi/Cu solder joint was the lowest because of the refinement of Ni. SAC0705-BiNi/Cu solder joint showed the highest shear strength before and after being aged, mainly due to the enhancement of solid solution strengthening and dispersion strengthening of Bi and Ni in the bulk solder, as well as the refinement of Ni at the soldering interface.

引用

页码：1705 / 1710

页数：6

共 19 条

[1] Development of Sn-Ag-Cu and Sn-Ag-Cu-X alloys for Pb-free electronic solder applications
Anderson, Iver E.
[J]. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2007, 18 (1-3) : 55 - 76
[2] Tensile properties and microstructural characterization of Sn-0.7Cu-0.4Co bulk solder alloy for electronics applications
Andersson, Cristina
Sun, Peng
Liu, Johan
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2008, 457 (1-2) : 97 - 105
[3] Evaluation of the influence of Bi and Sb additions to Sn-Ag-Cu and Sn-Zn alloys on their surface tension and wetting properties using analysis of variance - ANOVA
Bukat, K.
Sitek, J.
Kisiel, R.
Moser, Z.
Gasior, W.
Koscielski, M.
Pstrus, J.
[J]. SOLDERING & SURFACE MOUNT TECHNOLOGY, 2008, 20 (04) : 9 - 19
[4] Investigation of diffusion and electromigration parameters for Cu-Sn intermetallic compounds in Pb-free solders using simulated annealing
Chao, Brook
Chae, Seung-Hyun
Zhang, Xuefeng
Lu, Kuan-Hsun
Im, Jay
Ho, P. S.
[J]. ACTA MATERIALIA, 2007, 55 (08) : 2805 - 2814
[5] Microstructural and mechanical properties of Sn-Ag-Cu lead-free solders with minor addition of Ni and/or Co
Cheng, Fangjie
Nishikawa, Hiroshi
Takemoto, Tadashi
[J]. JOURNAL OF MATERIALS SCIENCE, 2008, 43 (10) : 3643 - 3648
[6] Tensile properties and wettability of SAC0307 and SAC105 low Ag lead-free solder alloys
Cheng, Fangjie
Gao, Feng
Zhang, Jianyou
Jin, Wenshan
Xiao, Xin
[J]. JOURNAL OF MATERIALS SCIENCE, 2011, 46 (10) : 3424 - 3429
[7] Investigation of mechanical shock testing of lead-free SAC solder joints in fine pitch BGA package
Chin, Y. T.
Lam, P. K.
Yow, H. K.
Tou, T. Y.
[J]. MICROELECTRONICS RELIABILITY, 2008, 48 (07) : 1079 - 1086
[8] A reliability model for SAC solder covering isothermal mechanical cycling and thermal cycling conditions
Herkommer, Dominik
Punch, Jeff
Reid, Michael
[J]. MICROELECTRONICS RELIABILITY, 2010, 50 (01) : 116 - 126
[9] Effect of zinc additions on structure and properties of Sn-Ag eutectic lead-free solder alloy
Kamal, Mustafa
Gouda, El Said
[J]. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2008, 19 (01) : 81 - 84
[10] Effects of fourth alloying additive on microstructures and tensile properties of Sn-Ag-Cu alloy and joints with Cu
Kim, KS
Huh, SH
Suganuma, K
[J]. MICROELECTRONICS RELIABILITY, 2003, 43 (02) : 259 - 267

← 1 2 →