Measurement of temperature and wavelength-dependent emissivity distributions using multi-wavelength radiation thermometry

A multi-wavelength radiation thermometry method used to determine the temperature and wavelength - dependent emissivity according to spectroscopic radiation intensities is presented. Over a predetermined temperature range, with a set step size, the method traverses the temperature range, and for each temperature, inversely fits a spectral line according to the intensity in the middle of the wavelength region, based on the Rayleigh approximation. The temperature with the spectral line closest to the measured spectral line is considered to be the optimum temperature at that accuracy level. Then, near that optimum temperature, the temperature range and step size are narrowed, to determine the optimum temperature at higher levels of accuracy. Iterating on this method until reaching the required accuracy level, the temperature can be achieved, and the wavelength-dependent emissivity can also be determined. Simulation verification was conducted showing good anti-noise performance and rapid processing capacity. Temperature and emissivity distributions for six heights of an axisymmetric laminar diffusion flame with 194 mL/min ethylene and 240 L/min air were given. Results show that along the line of sight, the radiation temperatures exhibit an average effect of the local temperatures, while the emissivity exhibits a cumulative effect of the absorption coefficients.