An analysis of flow and heat transfer in separated flows over blocked surface

被引:0
作者
Yemenici, O. [1 ]
Firatoglu, Z. A. [2 ]
机构
[1] Uludag Univ, Dept Mech Engn, TR-16059 Bursa, Turkey
[2] Univ Harran, Dept Mech Engn, Sanliurfa, Turkey
关键词
Flow separation; blocked surface; turbulent intensity; heat transfer enhancement; WALL-MOUNTED CUBES; TURBULENT-FLOW; RECTANGULAR BLOCKS; PRESSURE-DROP; FLUID-FLOW; CHANNEL; SIMULATION; LAMINAR; RIB;
D O I
10.1177/0954406212463515
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The flow and heat transfer characteristics of flat and blocked surfaces were experimentally examined under the influence of the free stream velocity of 3, 5, 10 and 15 m/s encompassing laminar, transitional and turbulent flows. A constant-temperature hot wire anemometer was used for the velocity and turbulent intensity measurements, and copper-constant thermocouples and a micro-manometer for temperature and static pressures measurements, respectively. The flow over blocked surface separated in front of the first block and attached on it, then circulated between blocks, and then reattached behind the last block. The results showed that the flow separation before the first block occurred earlier in laminar-laminar separated-reattached flow than the transitional and turbulent flows and turbulent-turbulent separated-reattached flow leading to a shorter reattachment region with high free-stream turbulence. The presence of the separation and reattachment caused the heat transfer enhancement, which was more pronounced in the laminar flow and new empirical equations were developed for the local Stanton numbers.
引用
收藏
页码:481 / 491
页数:11
相关论文
共 50 条
[31]   Numerical analysis of heat transfer and flow dynamics in a pipe with square extruded bluff cylinder inserts [J].
Bhattacharyya, Suvanjan ;
Banerjee, Arnab ;
Rahman, Md Anisur ;
Saha, Reeshika ;
Paul, Akshoy Ranjan .
2ND INTERNATIONAL CONFERENCE ON ENERGY AND POWER (ICEP2018), 2019, 160 :293-300
[32]   Heat transfer enhancement of free surface MHD-flow by a protrusion wall [J].
Huang, Hulin ;
Li, Bo .
FUSION ENGINEERING AND DESIGN, 2010, 85 (7-9) :1496-1502
[33]   Heat transfer and performance analysis of nanofluid flow in helically coiled tube heat exchangers [J].
Bahrehmand, S. ;
Abbassi, A. .
CHEMICAL ENGINEERING RESEARCH & DESIGN, 2016, 109 :628-637
[34]   Flow and heat transfer optimization of a fin-tube heat exchanger with vortex generators using Response Surface Methodology and Artificial Neural Network [J].
Xie, Changgui ;
Yan, Gongxing ;
Ma, Qiong ;
Elmasry, Yasser ;
Singh, Pradeep Kumar ;
Algelany, A. M. ;
Wae-hayee, Makatar .
CASE STUDIES IN THERMAL ENGINEERING, 2022, 39
[35]   ENHANCEMENT OF CONVECTIVE HEAT TRANSFER IN INTERNAL VISCOUS FLOWS BY INSERTING MOTIONLESS MIXERS [J].
Rahmani, Ramin K. ;
Ayasoufi, Anahita ;
Keith, Theo G. .
HT2009: PROCEEDINGS OF THE ASME SUMMER HEAT TRANSFER CONFERENCE 2009, VOL 2, 2009, :653-665
[36]   Heat transfer characteristics of slip flow over solid spheres [J].
Anbarsooz, Morteza ;
Niazmand, Hamid .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2016, 230 (19) :3431-3441
[37]   Transitional boundary layer flow and heat transfer over blocked surfaces with influence of free stream velocity and block height [J].
O. Yemenici ;
Z. A. Firatoglu .
Heat and Mass Transfer, 2013, 49 :1637-1646
[38]   Exceptional heat transfer performance induced by intrinsic flow oscillations during subcooled flow boiling over a copper mesh surface [J].
Argyropoulos, Christos ;
Karapantsios, Thodoris D. ;
Kostoglou, Margaritis .
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2021, 168
[39]   Analysis of flow and heat transfer in a new lattice [J].
Xiao, Hongguang ;
Yang, Lei ;
Yan, Binghuo .
ANNALS OF NUCLEAR ENERGY, 2015, 75 :536-541
[40]   Numerical Investigation of Flow and Heat Transfer in Rectangular Microchannels with and without Semi-Elliptical Protrusions [J].
Sun, Haiou ;
Fu, Hao ;
Yan, Lanyi ;
Ma, Hongfei ;
Luan, Yigang ;
Magagnato, Franco .
ENERGIES, 2022, 15 (13)