A Study on Electrofuels in Aviation

被引:86
作者
Goldmann, Andreas [1 ]
Sauter, Waldemar [2 ]
Oettinger, Marcel [3 ]
Kluge, Tim [3 ]
Schroeder, Uwe [2 ]
Seume, Joerg R. [3 ]
Friedrichs, Jens [4 ]
Dinkelacker, Friedrich [1 ]
机构
[1] Leibniz Univ Hannover, Inst Tech Combust, Welfengarten 1A, D-30167 Hannover, Germany
[2] TU Braunschweig, Inst Environm & Sustainable Chem, Hagenring 30, D-38106 Braunschweig, Germany
[3] Leibniz Univ Hannover, Inst Turbomachinery & Fluid Dynam, Appelstr 9, D-30167 Hannover, Germany
[4] TU Braunschweig, Inst Jet Prop & Turbomachinery, Hermann Blenk Str 37, D-38108 Braunschweig, Germany
关键词
renewable green fuels; electrofuels; aviation; fuel synthesis; combustion; turbine; IGNITION DELAY-TIME; AMMONIA/AIR PREMIXED FLAMES; LIQUID-HYDROGEN; CARBON-DIOXIDE; ELECTROCHEMICAL REDUCTION; EMISSION CHARACTERISTICS; BURNING VELOCITIES; SHOCK-TUBE; FUEL; COMBUSTION;
D O I
10.3390/en11020392
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
With the growth of aviation traffic and the demand for emission reduction, alternative fuels like the so-called electrofuels could comprise a sustainable solution. Electrofuels are understood as those that use renewable energy for fuel synthesis and that are carbon-neutral with respect to greenhouse gas emission. In this study, five potential electrofuels are discussed with respect to the potential application as aviation fuels, being n-octane, methanol, methane, hydrogen and ammonia, and compared to conventional Jet A-1 fuel. Three important aspects are illuminated. Firstly, the synthesis process of the electrofuel is described with its technological paths, its energy efficiency and the maturity or research need of the production. Secondly, the physico-chemical properties are compared with respect to specific energy, energy density, as well as those properties relevant to the combustion of the fuels, i.e., autoignition delay time, adiabatic flame temperature, laminar flame speed and extinction strain rate. Results show that the physical and combustion properties significantly differ from jet fuel, except for n-octane. The results describe how the different electrofuels perform with respect to important aspects such as fuel and air mass flow rates. In addition, the results help determine mixture properties of the exhaust gas for each electrofuel. Thirdly, a turbine configuration is investigated at a constant operating point to further analyze the drop-in potential of electrofuels in aircraft engines. It is found that electrofuels can generally substitute conventional kerosene-based fuels, but have some downsides in the form of higher structural loads and potentially lower efficiencies. Finally, a preliminary comparative evaluation matrix is developed. It contains specifically those fields for the different proposed electrofuels where special challenges and problematic points are seen that need more research for potential application. Synthetically-produced n-octane is seen as a potential candidate for a future electrofuel where even a drop-in capability is given. For the other fuels, more issues need further research to allow the application as electrofuels in aviation. Specifically interesting could be the combination of hydrogen with ammonia in the far future; however, the research is just at the beginning stage.
引用
收藏
页数:23
相关论文
共 88 条
[1]  
Adamczuk R. R., 2016, P ASME C P SEOUL S K
[2]   Solid-state electrochemical synthesis of ammonia: a review [J].
Amar, Ibrahim A. ;
Lan, Rong ;
Petit, Christophe T. G. ;
Tao, Shanwen .
JOURNAL OF SOLID STATE ELECTROCHEMISTRY, 2011, 15 (09) :1845-1860
[3]   Life cycle evaluation of hydrogen and other potential fuels for aircrafts [J].
Bicer, Yusuf ;
Dincer, Ibrahim .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2017, 42 (16) :10722-10738
[4]   HYDROGEN USAGE IN AIR TRANSPORTATION [J].
BREWER, GD .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 1978, 3 (02) :217-229
[5]   AVIATION USAGE OF LIQUID-HYDROGEN FUEL - PROSPECTS AND PROBLEMS [J].
BREWER, GD .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 1976, 1 (01) :65-88
[6]   An experimental and modeling study of propene oxidation. Part 2: Ignition delay time and flame speed measurements [J].
Burke, Sinead M. ;
Burke, Ultan ;
Mc Donagh, Reuben ;
Mathieu, Olivier ;
Osorio, Irmis ;
Keesee, Charles ;
Morones, Anibal ;
Petersen, Eric L. ;
Wang, Weijing ;
DeVerter, Trent A. ;
Oehlschlaeger, Matthew A. ;
Rhodes, Brandie ;
Hanson, Ronald K. ;
Davidson, David F. ;
Weber, Bryan W. ;
Sung, Chih-Jen ;
Santner, Jeffrey ;
Ju, Yiguang ;
Haas, Francis M. ;
Dryer, Frederick L. ;
Volkov, Evgeniy N. ;
Nilsson, Elna J. K. ;
Konnov, Alexander A. ;
Alrefae, Majed ;
Khaled, Fethi ;
Farooq, Aamir ;
Dirrenberger, Patricia ;
Glaude, Pierre-Alexandre ;
Battin-Leclerc, Frederique ;
Curran, Henry J. .
COMBUSTION AND FLAME, 2015, 162 (02) :296-314
[7]   An experimental and modeling study of propene oxidation. Part 1: Speciation measurements in jet-stirred and flow reactors [J].
Burke, Sinead M. ;
Metcalfe, Wayne ;
Herbinet, Olivier ;
Battin-Leclerc, Frederique ;
Haas, Francis M. ;
Santner, Jeffrey ;
Dryer, Frederick L. ;
Curran, Henry J. .
COMBUSTION AND FLAME, 2014, 161 (11) :2765-2784
[8]   A detailed chemical kinetic modeling, ignition delay time and jet-stirred reactor study of methanol oxidation [J].
Burke, Ultan ;
Metcalfe, Wayne K. ;
Burke, Sinead M. ;
Heufer, K. Alexander ;
Dagaut, Philippe ;
Curran, Henry J. .
COMBUSTION AND FLAME, 2016, 165 :125-136
[9]  
Caulfield R. A. R., 2011, SOLID STATE AMMONIA, P1
[10]   A review on hydrogen industrial aerospace applications [J].
Cecere, D. ;
Giacomazzi, E. ;
Ingenito, A. .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2014, 39 (20) :10731-10747