LAMINAR-TRANSITIONAL-TURBULENT LIQUID FLOW IN SMOOTH CAPILLARY PIPES

被引:0
作者
Szewczyk, Henryk [1 ]
机构
[1] Wroclaw Univ Technol, Fac Mech & Power Engn, Inst Thermal Engn & Fluid Mech, PL-50373 Wroclaw, Poland
来源
CHEMICAL AND PROCESS ENGINEERING-INZYNIERIA CHEMICZNA I PROCESOWA | 2008年 / 29卷 / 04期
关键词
D O I
暂无
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Hydraulic characteristics smooth capillaries of 280.6 and 327.8 mu m in diameters in the range of]550, 6600[ (sic) Re were determined experimentally The critical Reynolds number Re-cr approximate to 2100 (concerns capillaries with sharp-edged inlets, since Re-cr increases, when the edge is rounded off), whereas the flow is turbulent, if Re >= 2800. The laminar-turbulent transition occurs in the range of]2100, 2800[ (sic) Re, and the characteristic curves cease to run unequivocally, however, they are contained in the area with it determined envelope (not given in the literature). It was confirmed, based oil 1420 author's results (6 capillaries 281-1270 mu m, Re is an element of]180, 58001), that the Hagen-Poiseuille law and the Blasius formula are also related to microscale flows.
引用
收藏
页码:955 / 977
页数:23
相关论文
共 40 条
[1]   ASPECTS OF THE EQUILIBRIUM PUFF IN TRANSITIONAL PIPE-FLOW [J].
BANDYOPADHYAY, PR .
JOURNAL OF FLUID MECHANICS, 1986, 163 :439-458
[2]   Experimental investigation of hydraulic and single-phase heat transfer in 0.130-mm capillary tube [J].
Celata, GP ;
Cumo, M ;
Guglielmi, M ;
Zummo, G .
MICROSCALE THERMOPHYSICAL ENGINEERING, 2002, 6 (02) :85-97
[3]   Characterization of fluid dynamic behaviour and channel wall effects in microtube [J].
Celata, GP ;
Cumo, M ;
McPhail, S ;
Zummo, G .
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2006, 27 (01) :135-143
[4]   Thermal-hydraulic characteristics of single-phase, flow in capillary pipes [J].
Celata, GP ;
Cumo, M ;
Zummo, G .
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2004, 28 (2-3) :87-95
[5]   Flow pattern assessment in tubes with wire coil inserts in laminar and transition regimes [J].
Garcia, A. ;
Solano, J. P. ;
Vicente, P. G. ;
Viedma, A. .
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2007, 28 (03) :516-525
[6]   FLOW REGIME MAP FOR A HORIZONTAL PIPE WITH UNIFORM WALL HEAT-FLUX AND 3 INLET CONFIGURATIONS [J].
GHAJAR, AJ ;
TAM, LM .
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 1995, 10 (03) :287-297
[7]   Flow characteristics in a trapezoidal silicon microchannel [J].
Hao, PF ;
He, F ;
Zhu, KQ .
JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2005, 15 (06) :1362-1368
[8]   Critical view on "new results in micro-fluid mechanics": an example [J].
Herwig, H ;
Hausner, O .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2003, 46 (05) :935-937
[9]   Characterization of frictional pressure drop for liquid flows through microchannels [J].
Judy, J ;
Maynes, D ;
Webb, BW .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2002, 45 (17) :3477-3489
[10]   An experimental investigation of microchannel flow with internal pressure measurements [J].
Kohl, MJ ;
Abdel-Khalik, SI ;
Jeter, SM ;
Sadowski, DL .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2005, 48 (08) :1518-1533