Effect of Modifiers on Injection Molding of Waste Polyethylene Drip Tape

被引：0
|
作者：
Guo, Bin [1 ]
Wu, Shou-Jun [1 ]
Zhu, De-Lan [1 ]
机构：
[1] Northwest A&F Univ, Coll Water Resources & Architectural Engn, Yangling 712100, Shaanxi, Peoples R China
来源：
PROCEEDINGS OF THE 2015 INTERNATIONAL CONFERENCE ON MATERIAL SCIENCE AND APPLICATIONS (ICMSA 2015) | 2015年 / 3卷
关键词：
Polyethylene; Injection Molding; Ethylene-vinyl Acetate Copolymer; Dicumyl Peroxide; MECHANICAL-PROPERTIES; CROSS-LINKING; BLENDS;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this work, effects of Ethylene-vinyl acetate copolymer (EVA) and Dicumyl peroxide (DCP) on injection molding of recycled polyethylene (PE) materials obtained from a waste disposable drip tape are studied. Under injected at 175-230 degrees C and 35-40 MPa, the recycled PE materials with EVA showed good injection moldability, while those with DCP showed poor injection moldability with DCP introduction increasing. Under injected at 135-145 degrees C and 50-60 MPa, the recycled PE materials with DCP can be well injection molded.
引用
收藏
页码：948 / 951
页数：4
相关论文
共 50 条
  • [41] Cylindritic structures of high-density polyethylene molded by multi-melt multi-injection molding
    Zhang, Kai
    Liu, Zhengying
    Yang, Bin
    Yang, Wei
    Lu, Ying
    Wang, Long
    Sun, Nan
    Yang, Mingbo
    POLYMER, 2011, 52 (17) : 3871 - 3878
  • [42] Effect of Molding Parameters on the Interface Morphology of Metal Co-Injection Molding
    He, Hao
    Li, Yimin
    Wang, Guangyao
    MANUFACTURING PROCESS TECHNOLOGY, PTS 1-5, 2011, 189-193 : 2939 - 2944
  • [43] A comparison of mechanical properties of recycled high-density polyethylene/waste carbon fiber via injection molding and 3D printing
    Borkar, Ameya
    Hendlmeier, Andreas
    Simon, Zan
    Randall, James D.
    Stojcevski, Filip
    Henderson, Luke C.
    POLYMER COMPOSITES, 2022, 43 (04) : 2408 - 2418
  • [44] PROCESSIBILITY OF WASTE TO WEALTH GREEN POLYMER WITH POLYETHYLENE BY INJECTION MOULDING
    Salim, Nurul Syamimi M.
    Rus, Anika Zafiah M.
    JURNAL TEKNOLOGI, 2015, 77 (32):
  • [45] RICE HUSK/HIGH DENSITY POLYETHYLENE BIO-COMPOSITE: EFFECT OF RICE HUSK FILLER SIZE AND COMPOSITION ON INJECTION MOLDING PROCESSABILITY WITH RESPECT TO IMPACT PROPERTY
    Rahman, W. A. W. A.
    Isa, N. M.
    Rahmat, A. R.
    Adenan, N.
    Ali, R. R.
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS 1 AND 2, 2010, 83-86 : 367 - 374
  • [46] Effect of polyphenylene sulfide content on the properties of injection molding bonded NdFeB magnets
    Yang, Y.
    Sun, Y.
    Zhou, J.
    Su, L.
    Jia, M.
    Huang, F.
    Fang, X.
    Liu, J.
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2024, 55 (12) : 1673 - 1686
  • [47] The effect of injection molding process parameters on mechanical and fracture behavior of polycarbonate polymer
    Dar, Uzair Ahmed
    Xu, Ying Jie
    Zakir, Sheikh Muhammad
    Saeed, Muhammad-Umar
    JOURNAL OF APPLIED POLYMER SCIENCE, 2017, 134 (07)
  • [48] Effect of injection molding conditions on the properties of polyamide 6/calcium carbonate nanocomposite
    Augusto, Thiago A.
    Carastan, Danilo J.
    Santos, Amanda N. B.
    Bonse, Baltus C.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2023, 140 (30)
  • [49] Insert injection molding of high-density polyethylene single-polymer composites
    Mao, Qianchao
    Wyatt, Tom P.
    Chen, Jinnan
    Wang, Jian
    POLYMER ENGINEERING AND SCIENCE, 2015, 55 (11): : 2448 - 2456
  • [50] Polycaprolactone/polyethylene-glycol capsules made by injection molding: A drug release modeling
    Liparoti, Sara
    Franco, Paola
    Pantani, Roberto
    De Marco, Iolanda
    MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 2021, 123
12345