Effect of Modifiers on Injection Molding of Waste Polyethylene Drip Tape

被引：0
|
作者：
Guo, Bin [1 ]
Wu, Shou-Jun [1 ]
Zhu, De-Lan [1 ]
机构：
[1] Northwest A&F Univ, Coll Water Resources & Architectural Engn, Yangling 712100, Shaanxi, Peoples R China
来源：
PROCEEDINGS OF THE 2015 INTERNATIONAL CONFERENCE ON MATERIAL SCIENCE AND APPLICATIONS (ICMSA 2015) | 2015年 / 3卷
关键词：
Polyethylene; Injection Molding; Ethylene-vinyl Acetate Copolymer; Dicumyl Peroxide; MECHANICAL-PROPERTIES; CROSS-LINKING; BLENDS;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this work, effects of Ethylene-vinyl acetate copolymer (EVA) and Dicumyl peroxide (DCP) on injection molding of recycled polyethylene (PE) materials obtained from a waste disposable drip tape are studied. Under injected at 175-230 degrees C and 35-40 MPa, the recycled PE materials with EVA showed good injection moldability, while those with DCP showed poor injection moldability with DCP introduction increasing. Under injected at 135-145 degrees C and 50-60 MPa, the recycled PE materials with DCP can be well injection molded.
引用
收藏
页码：948 / 951
页数：4
相关论文
共 50 条
  • [31] Effect of microstructures on the shrinkage of injection molding product
    Yue Wu
    Yao Gong
    Kyoung Je Cha
    Jang Min Park
    Journal of Mechanical Science and Technology, 2019, 33 : 1357 - 1363
  • [32] Effect of backbone binders on rheological performance of ceramic injection molding feedstocks
    Hausnerova, Berenika
    Kasparkova, Vera
    Hnatkova, Eva
    POLYMER ENGINEERING AND SCIENCE, 2017, 57 (07): : 739 - 745
  • [33] Investigation of cooling effect at corners in injection molding
    Kovacs, J. G.
    Siklo, B.
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2011, 38 (10) : 1330 - 1334
  • [34] Effect of microstructures on the shrinkage of injection molding product
    Wu, Yue
    Gong, Yao
    Cha, Kyoung Je
    Park, Jang Min
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2019, 33 (03) : 1357 - 1363
  • [35] To Explore the Effect of Injection Molding Processing Parameters on Crazing in Acrylic Polymers
    Ahmed, Rafiq
    Mushtaq, Asim
    Hashmi, Saud
    Abbasi, Sindhia
    Ali, Zaeem Uddin
    JOURNAL OF THE CHEMICAL SOCIETY OF PAKISTAN, 2022, 44 (04): : 294 - 309
  • [36] Study of Banana Fiber as Reinforcement of Polyethylene Samples Made by Compression and Injection Molding
    Ortega, Zaida
    Benitez, Antonio N.
    Monzon, Mario D.
    Hernandez, Pedro M.
    Angulo, Ines
    Marrero, Maria D.
    JOURNAL OF BIOBASED MATERIALS AND BIOENERGY, 2010, 4 (02) : 114 - 120
  • [37] Community Waste Plastic Recycling System Through Plastic Injection Molding
    Koo, Lih Zhang
    Tong, Douglas Kum Tien
    Rinne, Matias
    14TH INTERNATIONAL ENGINEERING AND COMPUTING RESEARCH CONFERENCE SHAPING THE FUTURE THROUGH MULTIDISCIPLINARY RESEARCH (EURECA 2020), 2021, 335
  • [38] Numerical shape optimization as an approach to reduce material waste in injection molding
    Mario Studer
    Frank Ehrig
    The International Journal of Advanced Manufacturing Technology, 2015, 78 : 1557 - 1571
  • [39] Numerical shape optimization as an approach to reduce material waste in injection molding
    Studer, Mario
    Ehrig, Frank
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 78 (9-12): : 1557 - 1571
  • [40] Synergy of low-and high-density polyethylene in a binder system for powder injection molding of SiC ceramics
    Li, Hong wei
    Zhao, Yi peng
    Chen, Guo qing
    Li, Ming hao
    Fu, Xue song
    Zhou, Wen long
    CERAMICS INTERNATIONAL, 2022, 48 (17) : 25513 - 25520
12345