σ-phase morphologies and their effect on mechanical properties of duplex stainless steels

被引：0
|
作者：
Pohl, Michael [1 ]
Storz, Oliver [1 ]
Glogowski, Thomas [1 ]
机构：
[1] Ruhr Univ Bochum, Inst Werkstoffe Werkstoffprufung, D-44801 Bochum, Germany
来源：
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH | 2008年 / 99卷 / 10期
关键词：
Duplex stainless steel; sigma-phase; chi-phase; Mechanical properties;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The aim of the presented study is to investigate the influence of the different sigma-phase morphologies on the mechanical, wear and corrosive behaviour of the duplex Stainless steel 1.4462 (X2CrNiMoN 22 5 3). Different amounts of sigma-phase were precipitated in tensile. impact strength, wear and corrosion samples by annealing at 750 degrees C. 850 degrees C and 938 degrees C. sigma-phase shows a detrimental influence oil the impact strength and the corrosion behaviour. To a very limited extent it can be Used to slightly raise the strength Under quasi-static load and to improve the wear resistance. Finally, it can be concluded that sigma-phase has more unfavourable influences oil the material's behaviour than advantageous ones. Therefore, it should he avoided in duplex stainless steels.
引用
收藏
页码：1163 / 1170
页数：8
相关论文
共 50 条
  • [41] Effects of alloying elements on the mechanical properties and corrosion behaviors of 2205 duplex stainless steels
    Liou H.-Y.
    Pan Y.-T.
    Hsieh R.I.
    Tsai W.-T.
    Journal of Materials Engineering and Performance, 2001, 10 (02) : 231 - 241
  • [42] Analysis of the interface and mechanical properties of field-assisted sintered duplex stainless steels
    Garcia-Junceda, Andrea
    Diaz-Rivera, Coral
    Gomez-Torralba, Victor
    Rincon, Maria
    Campos, Monica
    Manuel Torralba, Jose
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 740 : 410 - 419
  • [43] Duplex stainless steels
    Berardi, Christina
    Springs, 2002, 41 (05): : 59 - 63
  • [44] Sigma-phase in duplex-stainless steels
    Pohl, M
    Storz, O
    ZEITSCHRIFT FUR METALLKUNDE, 2004, 95 (07): : 631 - 638
  • [45] Influence of Alloying on α-α′ Phase Separation in Duplex Stainless Steels
    Garfinkel, David A.
    Poplawsky, Jonathan D.
    Guo, Wei
    Young, George A.
    Tucker, Julie D.
    PROCEEDINGS OF THE 18TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL DEGRADATION OF MATERIALS IN NUCLEAR POWER SYSTEMS - WATER REACTORS, VOL 2, 2018, : 1183 - 1192
  • [46] Simulation of the precipitation of sigma phase in duplex stainless steels
    M. B. Cortie
    E. M. L. E. M. Jackson
    Metallurgical and Materials Transactions A, 1997, 28 : 2477 - 2484
  • [47] Simulation of the precipitation of sigma phase in duplex stainless steels
    Cortie, MB
    Jackson, EMLEM
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1997, 28 (12): : 2477 - 2484
  • [48] Duplex stainless steels: A dozen of significant phase transformations
    Padilha, A.F.
    Aguiar, D.J.M.
    Plaut, R.L.
    Defect and Diffusion Forum, 2012, 322 : 163 - 174
  • [49] Metallography of duplex-phase stainless steels welds
    Hrivnák, I
    Jesensky, M
    Gonzáles, SL
    Zúbor, P
    KOVOVE MATERIALY-METALLIC MATERIALS, 2004, 42 (02): : 104 - 120
  • [50] PHASE-EQUILIBRIA IN DUPLEX STAINLESS-STEELS
    HAYES, FH
    JOURNAL OF THE LESS-COMMON METALS, 1985, 114 (01): : 89 - 96
12345