σ-phase morphologies and their effect on mechanical properties of duplex stainless steels

被引：0
|
作者：
Pohl, Michael [1 ]
Storz, Oliver [1 ]
Glogowski, Thomas [1 ]
机构：
[1] Ruhr Univ Bochum, Inst Werkstoffe Werkstoffprufung, D-44801 Bochum, Germany
来源：
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH | 2008年 / 99卷 / 10期
关键词：
Duplex stainless steel; sigma-phase; chi-phase; Mechanical properties;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The aim of the presented study is to investigate the influence of the different sigma-phase morphologies on the mechanical, wear and corrosive behaviour of the duplex Stainless steel 1.4462 (X2CrNiMoN 22 5 3). Different amounts of sigma-phase were precipitated in tensile. impact strength, wear and corrosion samples by annealing at 750 degrees C. 850 degrees C and 938 degrees C. sigma-phase shows a detrimental influence oil the impact strength and the corrosion behaviour. To a very limited extent it can be Used to slightly raise the strength Under quasi-static load and to improve the wear resistance. Finally, it can be concluded that sigma-phase has more unfavourable influences oil the material's behaviour than advantageous ones. Therefore, it should he avoided in duplex stainless steels.
引用
收藏
页码：1163 / 1170
页数：8
相关论文
共 50 条
  • [31] Cast Structure and Properties of Duplex Stainless Steels
    Zhitenev A.I.
    Fedorov A.S.
    Kovalev P.V.
    Strekalovskaya D.A.
    Al’khimenko A.A.
    Steel in Translation, 2022, 52 (5) : 479 - 486
  • [32] Properties of vacuum sintered duplex stainless steels
    Dobrzanski, LA
    Brytan, Z
    Grande, MA
    Rosso, M
    Pallavicini, EJ
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 162 : 286 - 292
  • [33] Properties of vacuum sintered duplex stainless steels
    Dobrzanski, L. A.
    Brytan, Z.
    Grande, M. Actis
    Rosso, M.
    THERMEC 2006 SUPPLEMENT: 5TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS, 2007, 15-17 : 828 - 833
  • [34] Effect of nitriding on the microstructure and mechanical properties of stainless steels
    Faltejsek P.
    Joska Z.
    Pokorný Z.
    Dobrocký D.
    Studený Z.
    Manufacturing Technology, 2019, 19 (05): : 745 - 748
  • [35] Influence of phase transformations on the mechanical properties of austenitic stainless steels
    Lebedev, AA
    Kosarchuk, VV
    INTERNATIONAL JOURNAL OF PLASTICITY, 2000, 16 (7-8) : 749 - 767
  • [36] Effect of nitrogen content on microstructure and mechanical properties of duplex stainless steels via wire arc additive manufacturing
    Li, Gang
    Song, Shuainan
    Cai, Qun
    Wu, Biao
    Wen, Zhichao
    RAPID PROTOTYPING JOURNAL, 2025, 31 (01) : 111 - 126
  • [37] Effect of Alloying Elements on Corrosion, Microstructure and Mechanical Properties for Casted Free-Nickel Duplex Stainless Steels
    Rashad, Ragaie
    Amer, Amer E.
    Shash, Ahmed Y.
    Shendy, Hany
    MECHANICAL AND MATERIALS ENGINEERING OF MODERN STRUCTURE AND COMPONENT DESIGN, 2015, 70 : 1 - 11
  • [38] Effect of nitrogen on sintered duplex stainless steels
    Iglesias, FAC
    Román, JMR
    Prieto, JMR
    Cambronero, LG
    Godino, FJI
    POWDER METALLURGY, 2003, 46 (01) : 39 - 42
  • [39] Effect of Warm Processing Parameters on the Precipitation of γ-Phase in 2205 Duplex Stainless Steels
    Fan, Guangwei
    Liu, Jie
    Han, Peide
    Qiao, Guanjun
    Yang, Jianfeng
    ECO-MATERIALS PROCESSING AND DESIGN X, 2009, 620-622 : 165 - +
  • [40] Effect of Sigma Phase Precipitation on the Pitting Corrosion Mechanism of Duplex Stainless Steels
    Wang Yongqiang
    Sun Hao
    Li Na
    Xiong Yanhao
    Jing Hemin
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2018, 13 (10): : 9868 - 9887
12345