Effect of trace La addition on the microstructure and mechanical property of as-cast ADC12 Al-Alloy

被引:44
作者
Huang Xin [1 ]
Yan Hong [1 ]
机构
[1] Nanchang Univ, Sch Mech Elect Engn, Nanchang 330031, Peoples R China
基金
中国国家自然科学基金;
关键词
as-cast ADC12 Al-Alloy; rare earth; microstructure; intermetallic compound; mechanical property;
D O I
10.1007/s11595-013-0665-x
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The effects of addition of La on the microstructure of as-cast ADC12 Al-Alloy were investigated by using optical microscope (OM), X-ray diffraction (XRD), scanning electron microscope (SEM), and energy disperse spectroscopy (EDS). The experimental results showed that the alpha-Al and eutectic Si crystals were modified with the addition of 0.3 wt% La. The eutectic Si crystals showed a granular distribution. At the same time, the alloy possessed the best mechanical property. When more than 0.3 wt% La was added to ADC12 aluminum alloy, the microstructure of as-cast alloy was coarsening gradually with the increase of the content of La and the mechanical property decreased. The effect of rare earth La which was added in ADC12 Al-Alloy for up to 0.9 wt% had been investigated in this study. The dendrites of ADC12 Al-alloy was refined obviously and the morphology of Si crystals showed a particle structure when the addition of La reached 0.3 wt%. Besides, the acicular La-rich intermetallics in the alloy deteriorated the mechanical property of alloy. To avoid this unwanted phase, the amount of added rare earth La must be less than 0.6 wt%.
引用
收藏
页码:202 / 205
页数:4
相关论文
共 11 条
[1]   Eutectic modification and microstructure development in Al-Si alloys [J].
Dahle, AK ;
Nogita, K ;
McDonald, SD ;
Dinnis, C ;
Lu, L .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 413 :243-248
[2]   Effective parameter for the selection of modifying agent for Al-Si alloy [J].
Kang, H. S. ;
Yoon, W. Y. ;
Kim, K. H. ;
Kim, M. H. ;
Yoon, Y. P. ;
Cho, I. S. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 449 :334-337
[3]  
Knuutinen A., 2001, Journal Light Metals, V1, P229, DOI [10.1016/S1471-5317(02)00004-4, DOI 10.1016/S1471-5317(02)00004-4]
[4]  
Li Rongde, 2003, Chinese Journal of Mechanical Engineering, V39, P68, DOI 10.3901/JME.2003.11.068
[5]   Parameters controlling the microstructure of Al-11Si-2.Cu-Mg alloys [J].
Ma, Z. ;
Samuel, E. ;
Mohamed, A. M. A. ;
Samuel, A. M. ;
Samuel, F. H. ;
Doty, H. W. .
MATERIALS & DESIGN, 2010, 31 (02) :902-912
[6]  
[饶劲松 RAO Jinsong], 2005, [重庆大学学报, Journal of Chongqing University], V28, P24
[7]   Effect of trace La addition on the microstructures and mechanical properties of A356 (Al-7Si-0.35Mg) aluminum alloys [J].
Tsai, Yu-Chou ;
Chou, Cheng-Yu ;
Lee, Sheng-Long ;
Lin, Chih-Kuang ;
Lin, Jing-Chie ;
Lim, S. W. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 487 (1-2) :157-162
[8]  
Wu X. B., 2006, SPEC CAST NONF ALL A
[9]  
[杨义乐 YANG Yile], 2009, [热加工工艺, Hot Working Technology], V38, P50
[10]   Microstructures and La-rich compounds in a Cu-containing hypereutectic Al-Si alloy [J].
Yi, HK ;
Zhang, D ;
Sakata, T ;
Mori, H .
JOURNAL OF ALLOYS AND COMPOUNDS, 2003, 354 (1-2) :159-164