COMPRESSIVE FAILURE BEHAVIOR OF UNIDIRECTIONAL GFRP COMPOSITE UNDER THE INFLUENCE OF IN-PLANE FIBER WAVINESS

被引:0
|
作者
Swaroop, N. [1 ,2 ]
Yue, C. Y. [2 ]
Dasari, A. [3 ]
机构
[1] Nanyang Technol Univ, ERI N Interdisciplinary Grad Sch, Singapore, Singapore
[2] Nanyang Technol Univ, Sch Mech & Aerosp Engn, Singapore, Singapore
[3] Nanyang Technol Univ, Sch Mat Sci & Engn, Singapore, Singapore
关键词
GFRP; fiber waviness; compressive strength; wind turbine blade;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The study focuses on the failure modes and failure behavior of unidirectional glass fiber reinforced polymer (GFRP) composites under the influence of an intentionally induced uniform in-plane fiber waviness throughout the thickness of the laminate. A uniform single sinusoidal fiber waviness with different level of wave severity (Ws) values were considered for the coupon level experimental study. Based on ASTM D6641, a compression experiment was conducted on a set of specimens with and without fiber waviness defects. Comparison studies with non-defected specimens showed that along with a drastic reduction in compressive strength a transition in failure behavior and failure modes were observed with increase in fiber wave severity.
引用
收藏
页码:545 / 546
页数:2
相关论文
共 50 条
  • [21] Effect of in-plane fiber waviness defects on the compressive properties of quasi-isotropic thermoplastic composites
    Sitohang, R. D. R.
    Grouve, W. J. B.
    Warnet, L. L.
    Akkerman, R.
    COMPOSITE STRUCTURES, 2021, 272
  • [22] UNDERSTANDING THE EFFECT OF IN-PLANE FIBER WAVINESS ON DAMAGE BEHAVIOR OF CURED WOVEN COPOSITES
    Kashani, M. Haghi
    Milani, A. S.
    20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2015,
  • [23] Influence of in-plane shear on kink-plane orientation in a unidirectional fibre composite
    Wilhelmsson, D.
    Mikkelsen, L. P.
    Faester, S.
    Asp, L. E.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2019, 119 : 283 - 290
  • [24] Localized fiber waviness and implications for failure in unidirectional composites
    Garnich, MR
    Karami, G
    JOURNAL OF COMPOSITE MATERIALS, 2005, 39 (14) : 1225 - 1245
  • [25] Compression strength reduction in composites with in-plane fiber waviness
    Joyce, PJ
    Moon, TJ
    COMPOSITE MATERIALS: FATIGUE AND FRACTURE, SEVENTH VOLUME, 1998, 1330 : 76 - 96
  • [26] Failure plane orientations for transverse loading of a unidirectional fiber composite
    Christensen, RM
    DeTeresa, SJ
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2003, 40 (25) : 7055 - 7062
  • [27] Simulation of Guided Wave Interaction with In-Plane Fiber Waviness
    Leckey, Cara A. C.
    Juarez, Peter D.
    43RD REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, 2017, 1806
  • [28] In-plane deformation behavior of unidirectional carbon fiber/epoxy prepreg layups
    Chen P.
    Zhao Y.
    Chen F.
    Zhang B.
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2020, 37 (05): : 1049 - 1055
  • [29] A micromechanical model for longitudinal compressive failure in unidirectional fiber reinforced composite
    Zhou, Longwei
    Zhao, Libin
    Liu, Fengrui
    Zhang, Jianyu
    RESULTS IN PHYSICS, 2018, 10 : 841 - 848
  • [30] Failure Analysis of Laminated Composites under In-plane Compressive Loading
    Yang, Yinhuan
    NEW MATERIALS AND PROCESSES, PTS 1-3, 2012, 476-478 : 583 - 586