Tribological behavior of ultra-high molecular weight polyethylene in a hip joint simulator

In this paper effects of various injection molding parameters on tribological properties of ultra-high molecular weight polyethylene (UHMWPE) were investigated. The tribological properties like coefficient of friction and wear rate were obtained from the experimental results of hip simulator which was designed and fabricated in the laboratory. Bovine serum was used as a lubricant in this study. In addition, the hardness of the specimen was also investigated as well. The injection molding parameters that varied for this study are melt temperature, injection velocity and compaction time. The results show that contact loads and melt temperature were mostly influenced the tribological behavior of UHMWPE. A wear mechanism map was developed to study the dominant wear mechanism that influences the wear behavior of UHMWPE. SEM was employed to study the worn out morphologies of UHMWPE. The dominant wear mechanisms that are dominated through our study are ironing, scratching, ploughing, plastic deformation, and fatigue wear.