Highly dispersed graphene oxide electrodeposited carbon fiber reinforced cement-based materials with enhanced mechanical properties

被引:137
作者
Lu, Zeyu [1 ]
Hanif, Asad [2 ,3 ]
Sun, Guoxing [1 ]
Liang, Rui [1 ]
Parthasarathy, Pavithra [2 ]
Li, Zongjin [1 ]
机构
[1] Univ Macau, Inst Appl Phys & Mat Engn, Macau, Peoples R China
[2] Hong Kong Univ Sci & Technol, Dept Civil & Environm Engn, Hong Kong, Peoples R China
[3] Mirpur Univ Sci & Technol, Dept Civil Engn, Allama Iqbal Rd, Mirpur 10250, Ajk, Pakistan
关键词
Graphene oxide; Carbon fiber; Electrophoretic depositing method; Mechanical properties; Cement paste; COMPOSITES; PERFORMANCE; HYDRATION; STRENGTH;
D O I
10.1016/j.cemconcomp.2018.01.006
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Mechanical behavior of carbon fiber (CF) reinforced cement-based materials greatly depends on the dispersion of CF and interfacial properties between the CF and cement matrix. In this study, graphene oxide (GO) was utilized to modify the surface properties of CF, including the roughness, wettability and chemical reactivity, and the graphene oxide/carbon fiber (GO/CF) hybrid fibers were fabricated by a newly designed electrophoretic depositing method. The scanning electron microscopy and contact angle measurement results indicated that GO/CF hybrid fibers not only had a rougher surface which was expected to improve the physical friction when CF was pulled out from cement matrix, but also had a higher wettability surface that made it easier to contact with cement hydrates as nucleation sites. In addition, GO/CF hybrid fibers were capable of high chemical reactivity due to the introduction of GO with many functional groups, which ensured them more likely to interact with cement hydrates due to the hydrogen bonding at interface and therefore benefited to strengthen the bonding between the CF and cement matrix. In terms of mechanical behavior, three-point bending test showed that compared with the CF reinforced cement paste, flexural strength of the GO/CF hybrid fibers reinforced cement paste was enhanced by 14.58%, and could be further improved by 10.53% when the GO/CF hybrid fibers were pre-dispersed in the GO solution and then mixed with cement powders. The larger electrostatic repulsion and steric stabilization led to the better dispersion of GO/CF hybrid fibers in GO solution, which were responsible for the further mechanical enhancement of cement paste. In conclusion, the research outcomes provided a novel way for utilizing GO as both of dispersant and surface modifier to improve the dispersion of CF in cement and strengthen its bonding with cement hydrates, consequently achieving a significant enhancement in the mechanical properties of cement paste. (C) 2018 Elsevier Ltd. All rights reserved.
引用
收藏
页码:220 / 228
页数:9
相关论文
共 32 条
[1]   Investigation on electrically conductive aggregates produced by incorporating carbon fiber and carbon black [J].
Chen, Binmeng ;
Li, Bo ;
Gao, Yan ;
Ling, Tung-Chai ;
Lu, Zeyu ;
Li, Zongjin .
CONSTRUCTION AND BUILDING MATERIALS, 2017, 144 :106-114
[2]   Reduced graphene oxide deposited carbon fiber reinforced polymer composites for electromagnetic interference shielding [J].
Chen, Juan ;
Wu, Jiaming ;
Ge, Heyi ;
Zhao, Dan ;
Liu, Cong ;
Hong, Xiufeng .
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2016, 82 :141-150
[3]   Graphene oxide-deposited carbon fiber/cement composites for electromagnetic interference shielding application [J].
Chen, Juan ;
Zhao, Dan ;
Ge, Heyi ;
Wang, Jian .
CONSTRUCTION AND BUILDING MATERIALS, 2015, 84 :66-72
[4]   Reinforcing mechanism of graphene at atomic level: Friction, crack surface adhesion and 2D geometry [J].
Chen, Shu Jian ;
Li, Chen Yang ;
Wang, Quan ;
Duan, Wen Hui .
CARBON, 2017, 114 :557-565
[5]   Mechanical behavior of recycled coarse aggregate concrete reinforced with steel fibers under direct shear [J].
Gao, Danying ;
Zhang, Lijuan ;
Nokken, Michelle .
CEMENT & CONCRETE COMPOSITES, 2017, 79 :1-8
[6]   Dispersion of carbon fibers in cement-based composites with different mixing methods [J].
Gao, Jie ;
Wang, Zhenjun ;
Zhang, Ting ;
Zhou, Liang .
CONSTRUCTION AND BUILDING MATERIALS, 2017, 134 :220-227
[7]   Properties of 3D-printed fiber-reinforced Portland cement paste [J].
Hambach, Manuel ;
Volkmer, Dirk .
CEMENT & CONCRETE COMPOSITES, 2017, 79 :62-70
[8]  
Han B., 2017, COMPOS A
[9]   Fiber-reinforced cementitious composites incorporating glass cenospheres - Mechanical properties and microstructure [J].
Hanif, Asad ;
Parthasarathy, Pavithra ;
Lu, Zeyu ;
Sun, Ming ;
Li, Zongjin .
CONSTRUCTION AND BUILDING MATERIALS, 2017, 154 :529-538
[10]   Properties investigation of fiber reinforced cement-based composites incorporating cenosphere fillers [J].
Hanif, Asad ;
Lu, Zeyu ;
Diao, Su ;
Zeng, Xiaohui ;
Li, Zongjin .
CONSTRUCTION AND BUILDING MATERIALS, 2017, 140 :139-149