Strengthening effect induced by interfacial reaction in graphene nanoplatelets reinforced aluminum matrix composites

被引:49
作者
Xiong, Bowen [1 ]
Liu, Kang [1 ]
Xiong, Wei [1 ]
Wu, Xiang [1 ]
Sun, Jiayi [1 ]
机构
[1] Nanchang Hangkong Univ, Natl Def Key Discipline Lab Light Alloy Proc Sci, Nanchang 330063, Jiangxi, Peoples R China
关键词
Al matrix composites; Graphene; Strengthening mechanisms; Interfacial reaction; Load transfer; ENHANCED MECHANICAL-PROPERTIES; LOAD-TRANSFER; CARBON NANOTUBES; TENSILE PROPERTIES; POWDER-METALLURGY; MICROSTRUCTURE; OXIDE; NANOSHEETS; PROPERTY; ALLOY;
D O I
10.1016/j.jallcom.2020.156282
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
GNPs/Al composites with the different volume fractions of GNPs (0.3, 0.6, 0.9 and 1.2 vol %) were successfully fabricated by spark plasma sintering. Microscopy observation indicated that interfacial Al4C3 phases take on nano-rod or granulate with a mean diameter of similar to 30 nm. Nano-sized Al4C3 phases are uniformly distributed and intimately contacted with GNPs. The interfacial bonding state between GNPs and Al matrix changes from mechanical bonding to strong chemical bonding, because Al4C3 phases are tightly locked into Al matrix forming an anchor effect. The strengthening effect induced by interfacial reaction in GNPs/Al composites was investigated according to grain refinement strengthening, Orowan strengthening, dislocation strengthening by CTE mismatch and load transfer. It is innovatively proposed that GNPs and nano-sized Al4C3 phase should be taken as a whole to discuss the strengthening effect in GNPs/Al composites. Load transfer in GNPs/Al composites is significantly affected by interfacial nanosized Al4C3 phases. Due to the deformation strengthening of Al matrix during tension and the anchor effect of Al4C3 phase, load transfer calculated from the experimental value is one-to twofold higher than its theoretical maximum. This work can provide some meaningful suggests for revealing the strengthening behavior of GNPs reinforced metal matrix composites. (C) 2020 Elsevier B.V. All rights reserved.
引用
收藏
页数:13
相关论文
共 59 条
  • [21] Measurement of the elastic properties and intrinsic strength of monolayer graphene
    Lee, Changgu
    Wei, Xiaoding
    Kysar, Jeffrey W.
    Hone, James
    [J]. SCIENCE, 2008, 321 (5887) : 385 - 388
  • [22] Effects of graphene content on microstructures and tensile property of graphene-nanosheets / aluminum composites
    Li, Gang
    Xiong, Bowen
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 697 : 31 - 36
  • [23] Effects of carbon fiber/Al interface on mechanical properties of carbon-fiber-reinforced aluminum-matrix composites
    Li, SH
    Chao, CG
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2004, 35A (07): : 2153 - 2160
  • [24] Single-layer graphene oxide reinforced metal matrix composites by laser sintering: Microstructure and mechanical property enhancement
    Lin, Dong
    Liu, C. Richard
    Cheng, Gary J.
    [J]. ACTA MATERIALIA, 2014, 80 : 183 - 193
  • [25] Investigation of the evolution and strengthening effect of aluminum carbide for in-situ preparation of carbon nanosheets/aluminum composites
    Liu, Xinghai
    Liu, Enzuo
    Li, Jiajun
    He, Chunnian
    Zhao, Naiqin
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 764
  • [26] Inverse Hall-Petch behavior in diamantane stabilized bulk nanocrystalline aluminum
    Maung, Khinlay
    Earthman, James C.
    Mohamed, Farghalli A.
    [J]. ACTA MATERIALIA, 2012, 60 (16) : 5850 - 5857
  • [27] An analysis of strengthening mechanisms in a mechanically alloyed, oxide dispersion strengthened iron aluminide intermetallic
    Muñoz-Morris, MA
    Oca, CG
    Morris, DG
    [J]. ACTA MATERIALIA, 2002, 50 (11) : 2825 - 2836
  • [28] Orowan E, 1934, Z PHYS, V89, P634, DOI 10.1007/BF01341480
  • [29] Strengthening mechanisms in carbon nanotube-reinforced aluminum composites
    Park, Jong Gil
    Keum, Dong Hoon
    Lee, Young Hee
    [J]. CARBON, 2015, 95 : 690 - 698
  • [30] PETCH NJ, 1953, J IRON STEEL I, V174, P25