Chemical reaction and stability of Ti3SiC2 in Cu during high-temperature processing of Cu/Ti3SiC2 composites

被引:53
|
作者
Zhou, YC [1 ]
Gu, WL [1 ]
机构
[1] Chinese Acad Sci, Met Res Inst, Shenyang Natl Lab Mat Sci, High Performance Ceram Div, Shenyang 110016, Peoples R China
来源
ZEITSCHRIFT FUR METALLKUNDE | 2004年 / 95卷 / 01期
关键词
Ti3SiC2; Cu; composite; chemical reaction; processing; microstructure;
D O I
10.3139/146.017911
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Chemical reactions and stability of Ti3SiC2 in Cu during processing of Cu/Ti3SiC2 composites in the temperature range of 900-1070 degreesC were investigated using X-ray diffraction and scanning electron microscopy. The results indicated that Cu reacted with Ti3SiC2 above 900 degreesC, and the reaction products were closely related to the reaction temperature and the relative ratio of Cu and Ti3SiC2. At low Ti3SiC2 content or temperatures below 1000 degreesC, Cu(Si) solid solution and TiCx were formed, whereas at high reaction temperature and high Ti3SiC2 content, Cu-Si intermetallic compounds like Cu5Si, Cu15Si4 and (Cu, Si) eta' as well as TiCx were observed. The transporting process for the reaction was investigated and described. It was found that de-intercalation of Si from Ti3SiC2 dominated the reaction, which dissolved in copper to form Cu(Si) solid solution or Cu-Si intermetallic compounds such as Cu5Si, Cu15Si4 and (Cu, Si) eta'. TiCx was always present as the decomposition product of Ti3SiC2.
引用
收藏
页码:50 / 56
页数:7
相关论文
共 50 条
  • [41] In situ synthesis of Ti3SiC2/SiC composite by displacement reaction of Si and TiC
    Li, SB
    Xie, JX
    Zhang, LT
    Cheng, LF
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 381 (1-2): : 51 - 56
  • [42] Friction and wear behavior of polytetrafluoroethene composites filled with Ti3SiC2
    Xu, Jianguang
    Yan, Hanbing
    Gu, Daguo
    MATERIALS & DESIGN, 2014, 61 : 270 - 274
  • [43] Rapid synthesis of TiC/Ti3SiC2 composites by laser melting
    Chen, Deqiang
    Tian, Xiangjun
    Wang, Huaming
    Huang, Zheng
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2014, 47 : 102 - 107
  • [44] Preparation of Ti3SiC2 MAX phase from Ti, TiC, and SiC by SPS
    Csaki, Stefan
    Lukac, Frantisek
    Veverka, Jakub
    Chraska, Tomas
    CERAMICS INTERNATIONAL, 2022, 48 (19) : 28391 - 28395
  • [45] Direct diffusion bonding of Ti3SiC2 and Ti3AlC2
    Yin, Xiaohui
    Li, Meishuan
    Xu, Jingjun
    Zhang, Jie
    Zhou, Yanchun
    MATERIALS RESEARCH BULLETIN, 2009, 44 (06) : 1379 - 1384
  • [46] Effect of aluminum on the reaction synthesis of ternary carbide Ti3SiC2
    Zhu, JO
    Mei, BC
    Xu, XW
    Liu, J
    SCRIPTA MATERIALIA, 2003, 49 (07) : 693 - 697
  • [47] Self-lubricating behavior caused by tribo-oxidation of Ti3SiC2/Cu composites in a wide temperature range
    Zhang, Rui
    Liu, Fuyan
    Tulugan, Kelimu
    CERAMICS INTERNATIONAL, 2022, 48 (11) : 15504 - 15515
  • [48] Toughening alumina with layered Ti3SiC2 inclusions
    Chin, Yuan-Liang
    Tuan, Wei-Hsing
    Huang, Jow-Lay
    Wang, Chang-An
    JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 491 (1-2) : 477 - 482
  • [49] Preparation and ablation behavior of Ti3SiC2 ceramics
    Zhang Yong
    Liu Hua-yan
    Zhang You-yuan
    Yan Qing-zhi
    CAILIAO GONGCHENG-JOURNAL OF MATERIALS ENGINEERING, 2021, 49 (09): : 119 - 127
  • [50] Arc ablation properties of Ti3SiC2 material
    Huang, Xiaochen
    Feng, Yi
    Qian, Gang
    Zhou, Zijue
    CERAMICS INTERNATIONAL, 2019, 45 (16) : 20297 - 20306