Chemical reaction and stability of Ti3SiC2 in Cu during high-temperature processing of Cu/Ti3SiC2 composites

被引:53
|
作者
Zhou, YC [1 ]
Gu, WL [1 ]
机构
[1] Chinese Acad Sci, Met Res Inst, Shenyang Natl Lab Mat Sci, High Performance Ceram Div, Shenyang 110016, Peoples R China
来源
ZEITSCHRIFT FUR METALLKUNDE | 2004年 / 95卷 / 01期
关键词
Ti3SiC2; Cu; composite; chemical reaction; processing; microstructure;
D O I
10.3139/146.017911
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Chemical reactions and stability of Ti3SiC2 in Cu during processing of Cu/Ti3SiC2 composites in the temperature range of 900-1070 degreesC were investigated using X-ray diffraction and scanning electron microscopy. The results indicated that Cu reacted with Ti3SiC2 above 900 degreesC, and the reaction products were closely related to the reaction temperature and the relative ratio of Cu and Ti3SiC2. At low Ti3SiC2 content or temperatures below 1000 degreesC, Cu(Si) solid solution and TiCx were formed, whereas at high reaction temperature and high Ti3SiC2 content, Cu-Si intermetallic compounds like Cu5Si, Cu15Si4 and (Cu, Si) eta' as well as TiCx were observed. The transporting process for the reaction was investigated and described. It was found that de-intercalation of Si from Ti3SiC2 dominated the reaction, which dissolved in copper to form Cu(Si) solid solution or Cu-Si intermetallic compounds such as Cu5Si, Cu15Si4 and (Cu, Si) eta'. TiCx was always present as the decomposition product of Ti3SiC2.
引用
收藏
页码:50 / 56
页数:7
相关论文
共 50 条
  • [21] Polycarbosilane derived Ti3SiC2
    Luo Yongming
    Zheng Zhimin
    Xu Calihong
    Mei Xuening
    MATERIALS LETTERS, 2008, 62 (20) : 3570 - 3572
  • [22] Preparation and Properties of Ti3SiC2
    Yu Tie
    Chen Guoqing
    Fu Xuesong
    Zu Yufei
    Zhou Wenlong
    RARE METAL MATERIALS AND ENGINEERING, 2013, 42 : 513 - 517
  • [23] In situ synthesis and microstructure of Ti3SiC2/SiC composite
    Li, SB
    Zhai, HX
    Zhou, Y
    Zhang, ZL
    RARE METAL MATERIALS AND ENGINEERING, 2005, 34 : 305 - 308
  • [24] Microstructure and mechanical properties of Ti3SiC2/Ti3SiC2 diffusion bonded joints using Ti foil as an interlayer
    Wang, Y.
    Wu, X. F.
    Yang, Z. W.
    Xia, Y. H.
    Wang, D. P.
    CERAMICS INTERNATIONAL, 2019, 45 (16) : 20900 - 20909
  • [25] Influence of Ti3SiC2 content on erosion behavior of Cu-Ti3SiC2 cathode under vacuum arc
    Ngai, Sieglind
    Zhang, Peng
    Xie, Heng
    Wu, Hao
    Ngai, Tungwai
    Li, Liejun
    Li, Wei
    Vogel, Florian
    CERAMICS INTERNATIONAL, 2021, 47 (18) : 25973 - 25985
  • [26] High temperature interfacial phase stability of a Mo/Ti3SiC2 laminated composite
    Yi, Yaoyong
    Ngai, Tungwai
    Wang, Andi
    Zhang, Peng
    Li, Liejun
    CERAMICS INTERNATIONAL, 2016, 42 (09) : 10951 - 10956
  • [27] Copper-SiC whiskers composites with interface optimized by Ti3SiC2
    Li, Mian
    Chen, Fanyan
    Si, Xiaoyang
    Wang, Ji
    Du, Shiyu
    Huang, Qing
    JOURNAL OF MATERIALS SCIENCE, 2018, 53 (13) : 9806 - 9815
  • [28] Thermophysical Properties of Ti3SiC2 MAX Phase Composites with SiC Reinforcement
    Bajpai, Shipra
    Ma, Beihai
    Singh, Dileep
    TRANSACTIONS OF THE INDIAN CERAMIC SOCIETY, 2025,
  • [29] Effect of Ti3SiC2 addition on microwave absorption property of plasma sprayed Ti3SiC2/NASICON coatings
    Chen, Dan
    Luo, Fa
    Zhou, Wancheng
    Zhu, Dongmei
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2018, 29 (16) : 13534 - 13540
  • [30] Synthesis and Tribological Characterization of Ti3SiC2/ZnO Composites
    Zhang, Rui
    Feng, Wei
    Wei, Qi
    Ma, Shuai
    MATERIALS, 2021, 14 (20)