Effects of intergranular carbide precipitation on delayed fracture behavior in three TWinning Induced Plasticity (TWIP) steels

被引：36
作者：
Hong, Seokmin [1 ]
Lee, Junghoon [1 ]
Lee, Byeong-Joo [1 ]
Kim, Hyoung Seop [1 ]
Kim, Sung-Kyu [2 ]
Chin, Kwang-Geun [2 ]
Lee, Sunghak [1 ]
机构：
[1] Pohang Univ Sci & Technol, Ctr Adv Aerosp Mat, Pohang 790784, South Korea
[2] POSCO, Tech Res Labs, High Manganese Sheet Steel Project Team, Gwangyang 545711, South Korea
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2013年 / 587卷
关键词：
TWIP steels; Intergranular carbide; Delayed fracture; Intergranular fracture; FE-MN-C; HYDROGEN; AL; ALUMINUM; GRAIN; MICROSTRUCTURE; TRANSFORMATION; CRACKING; BORON; EMBRITTLEMENT;
D O I：
10.1016/j.msea.2013.08.063
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The delayed fracture behavior related with intergranular carbide precipitation of three TWinning Induced Plasticity (TWIP) steels was investigated. According to the microstructural analysis, nanosized (Fe,Mn)(3)C cementites were precipitated along grain boundaries in the 0.6C-22Mn and 0.6C-18Mn steels, whereas their precipitation was hardly observed in the 0.6C-18Mn-2Al steel, which was confirmed by equilibrium phase diagrams calculated from a ThermoCalc program. When cup specimens were dipped in the boiled water, the 0.6C-22Mn, 0.6C-18Mn, and 0.6C-18Mn-2Al steel cups were cracked after 5.5, 15, and 169 h, respectively. The delayed fracture regions consisted of intergranular facets, and the tendency of intergranular facture decreased in the order of 0.6C-22Mn, 0.6C-18Mn, and 0.6C-18Mn-2Al steels. Thus, the delayed fracture behavior was closely related with the intergranular fracture mode caused by grain boundary cementites. The addition of Al remarkably increased the resistance to delayed fracture because it suppressed the formation of grain boundary cementites and reduced the residual stresses in the cup specimen. (C) 2013 Elsevier B.V. All rights reserved.
引用
收藏
页码：85 / 99
页数：15
相关论文
共 46 条
  • [41] Microstructural characterization of Hadfield austenitic manganese steel
    Srivastava, Ashok Kumar
    Das, Karabi
    [J]. JOURNAL OF MATERIALS SCIENCE, 2008, 43 (16) : 5654 - 5658
  • [42] THE THERMO-CALC DATABANK SYSTEM
    SUNDMAN, B
    JANSSON, B
    ANDERSSON, JO
    [J]. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, 1985, 9 (02): : 153 - 190
  • [43] Thorpe M.D., 2002, SAE WORLD C SAE INT
  • [44] Effect of hydrogen on the fracture behavior of high strength steel during slow strain rate test
    Wang, Maoqiu
    Akiyama, Eiji
    Tsuzaki, Kaneaki
    [J]. CORROSION SCIENCE, 2007, 49 (11) : 4081 - 4097
  • [45] EFFECTS OF GRAIN-BOUNDARY CARBIDE ON THE STRESS-STRAIN CURVES OF TYPE-316 STAINLESS-STEEL
    WU, SS
    CHEN, SY
    GAN, D
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1990, 127 (01): : L1 - L5
  • [46] THE EFFECT OF ALUMINUM ON THE WORK-HARDENING AND WEAR-RESISTANCE OF HADFIELD MANGANESE STEEL
    ZUIDEMA, BK
    SUBRAMANYAM, DK
    LESLIE, WC
    [J]. METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1987, 18 (09): : 1629 - 1639
12345