Mechanism of grain growth control in Ti(C, N)-based cermet during sintering

被引：0
|
作者：
Zheng, Y [1 ]
Yu, HJ [1 ]
Bu, HJ [1 ]
机构：
[1] Nanjing Univ Aeronaut & Astronaut, Coll Mat Sci & Technol, Nanjing 210016, Peoples R China
来源：
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2005年 / 15卷
关键词：
cermet; grain growth inhibitors; microstructure;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
A typical Ti(C, N)-based cermet and another cerruct with grain growth inhibitor Cr,C, were studied using scanning electron microscopy (SEM), transmission electron microscopy ( TEM), energy dispersive X ray analysis (EDX). The two cermets have a "core-rim" structure. The structure is formed by dissolution of small ceramic grains and precipitation of (Ti. Mo. W) (C, N) around the remaining TiC core. Most of chromium element congregated in the rim phase when Cr,,G, was added. During liquid phase sintering solved in binder phase and congregated around the hard grains, which reduced the solubility of TiC ill liquid phase and consequently restrained the dissolution and reprecipitation, the grains were restrained front growing up during sintering.
引用
收藏
页码：144 / 147
页数：4
相关论文
共 50 条
  • [41] Strengthening and toughening mechanism of (W,Ti,Ta)C based cermet with the addition of c-BN@Al2O3
    Yi, Mingdong
    Jing, Guiqiang
    Li, Depeng
    Xiao, Guangchun
    Chen, Zhaoqiang
    Zhang, Jingjie
    Wang, Li
    Xu, Chonghai
    CERAMICS INTERNATIONAL, 2021, 47 (22) : 32075 - 32085
  • [42] Microstructure evolution and phase transformation during spark plasma sintering of Ti(C,N)-based cermets
    Zheng, Yong
    Wang, Shengxiang
    Yan, Yonglin
    Zhao, Nengwei
    Chen, Xin
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2008, 26 (04) : 306 - 311
  • [43] Enhanced densification of ultrafine Ti(C, N)-based cermets based on grain-growth induced liquid-phase pore filling mechanism
    Zhou, Sheng-Jian
    Ouyang, Jia-Hu
    Yu, Yong-Bo
    Wang, Yu-Jin
    Chen, Lei
    Liu, Zhan-Guo
    Zhou, Yu
    JOURNAL OF ALLOYS AND COMPOUNDS, 2024, 986
  • [44] Influence of sintering parameters on the grain growth and mechanical properties of Ti(C,N)-based cermets prepared via mechanical activation and in-situ carbothermal reduction
    Xu, Xiangyu
    Zheng, Yong
    Liang, Haifeng
    Yang, Min
    Zhao, Yijie
    Zhou, Wei
    MATERIALS TODAY COMMUNICATIONS, 2022, 33
  • [45] Effect of hot isostatic pressing nitrogen on the microstructure and properties of a Ti(C,N)-based cermet
    Yan Xianmei
    Xiong Weihao
    Yang Yong
    Zheng Liyun
    RARE METALS, 2006, 25 (04) : 321 - 325
  • [46] Effect of hot isostatic pressing nitrogen on the microstructure and properties of a Ti(C,N)-based cermet
    YAN Xianmei
    RareMetals, 2006, (04) : 321 - 325
  • [47] Preparation of ultrafine Ti(C, N)-based cermet using oxygen-rich powders
    Feng, P
    He, YH
    Xiong, WH
    Xiao, YF
    JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY, 2005, 12 (Suppl 1): : 39 - 43
  • [48] Preparation of ultrafine Ti(C, N)-based cermet using oxygen-rich powders
    Ping Feng
    Yue-hui He
    Wei-hao Xiong
    Yi-feng Xiao
    Journal of Central South University of Technology, 2005, 12 : 39 - 43
  • [49] Investigation on the mechanism of deteriorated oxidation resistance of Ti (C0.7,N0.3)-304ss cermet doped with Y during the early oxidation stage
    He, Lin
    Dong, Anping
    Gao, Yimin
    Li, Yefei
    Du, Dafan
    Wang, Donghong
    Zhu, Guoliang
    Lu, Yanling
    Sun, Baode
    CORROSION SCIENCE, 2021, 187
  • [50] Growth and Properties of TiN/Al2O3/Ti(C, N)/TiN Multilayer CVD Coatings on Ti (C, N)-Based Cermet Substrates with Ni, Co and Fe Binders
    Liu, Junbo
    Xiong, Ji
    Guo, Zhixing
    Qin, Chengtao
    Xiao, Ya
    You, Qianbing
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2020, 51 (02): : 863 - 873
12345