Analysis of the Effect of Severe Accident Scenario on Debris Properties in Lower Plenum of Nordic BWR Using Different Versions of MELCOR Code

Nordic Boiling Water Reactors (BWRs) employ ex-vessel debris coolability as a severe accident management strategy (SAM). Core melt is released into a deep pool of water where formation of noncoolable debris bed and ex-vessel steam explosion can pose credible threats to containment integrity. Success of the strategy depends on the scenario of melt release from the vessel that determines the melt-coolant interaction phenomena. The melt release conditions are determined by the in-vessel phase of severe accident progression. Specifically, properties of debris relocated into the lower plenum have influence on the vessel failure and melt release mode. In this work we use MELCOR code for prediction of the relocated debris. Over the years, many code modifications have been made to improve prediction of severe accident progression in light-water reactors. The main objective of this work is to evaluate the effect of models and best practices in different versions of MELCOR code on the in-vessel phase of different accident progression scenarios in Nordic BWR. The results of the analysis show that the MELCOR code versions 1.86 and 2.1 generate qualitatively similar results. Significant discrepancy in the timing of the core support failure and relocated debris mass in the MELCOR 2.2 compared to the MELCOR 1.86 and 2.1 has been found for a domain of scenarios with delayed time of depressurization. The discrepancies in the results can be explained by the changes in the modeling of degradation of the core components and changes in the Lipinski dryout model in MELCOR 2.2.