Prediction of Stress and Strain Based Forming Limit Diagram During Tube Hydroforming Process

被引：8

作者：

Pambhar, Ankit ^{[1
]}

Narasimhan, K. ^{[1
]}

机构：

[1] Indian Inst Technol, Dept Met Engn & Mat Sci, Bombay 400076, Maharashtra, India

来源：

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2013年 / 66卷 / 5-6期

关键词：

Forming limits; Hydroforming; Stress based forming limits; Simulation;

D O I：

10.1007/s12666-013-0336-9

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Hydroforming process is most widely used in automotive industries. The current work involves the formability evaluation of DQ Steel and Al 5182 tubular blanks using the bulge test simulation done on PAM-STAMP 2G solver. The dependence of stress based forming limit diagrams are also evaluated in complex loading paths in case of hydro-forming as they are independent of strain paths.

引用

页码：665 / 669

页数：5

共 8 条

[1] Koc M, 2008, WOODHEAD PUBL MATER, P1
[2] A NEW CRITERION TO PREDICT NECKING FAILURE UNDER BIAXIAL STRETCHING
KUMAR, S
DATE, PP
NARASIMHAN, K
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1994, 45 (1-4) : 583 - 588
[3] Lin Z, 2007, T NONFERROUS METALS, V17, P21
[4] Effects of process parameters and material properties on deformation process in tube hydroforming
Manabe, K
Amino, M
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 123 (02) : 285 - 291
[5] NANDEDKAR VM, 2000, THESIS IIT BOMBAY
[6] Computational analysis of stress-based forming limit curves
Simha, C. Hari Manoj
Grantab, Rassin
Worswick, Michael J.
[J]. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2007, 44 (25-26) : 8663 - 8684
[7] Stress-based forming limits in sheet-metal forming
Stoughton, TB
[J]. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2001, 123 (04): : 417 - 422
[8] Finite element simulation of the tube hydroforming process - bending, preforming and hydroforming
Trana, K
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 127 (03) : 401 - 408

← 1 →