Detection of the occurrence of cutting vibration in surface profiles generated in CBN precision hard turning

被引：3
|
作者：
Grzesik, Wit [1 ]
Zak, Krzysztof [1 ]
Nieslony, Piotr [1 ]
Chudy, Roman [1 ]
机构：
[1] Opole Univ Technol, Proszkowska 76 St, PL-45758 Opole, Poland
来源：
4TH CIRP CONFERENCE ON SURFACE INTEGRITY (CSI 2018) | 2018年 / 71卷
关键词：
Hard machining; surface roughness; cutting vibration;
D O I：
10.1016/j.procir.2018.05.077
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The present paper presents an original contribution to the detection and quantification of cutting vibration in the surface profiles produced on hardened steel parts using CBN tools. Several machined surfaces with the Ra parameter ranging from 0.05 mu m to 0.3 mu m produced by feed rates of 0.05-0.1 mm/rev are analyzed using the FFT signal processing technique. Both recorded and simulated surface profiles along with relevant force records are processed in terms of the frequency characteristics estimated from the PSD spectra. A methodology for the comparison of the process and surface outputs leading to the detection of surface profile deteriorations caused by cutting vibration is proposed. (C) 2018 The Authors. Published by Elsevier Ltd.
引用
收藏
页码：89 / 92
页数：4
相关论文
共 50 条
  • [21] Energy consumption characterization in precision hard machining using CBN cutting tools
    Grzesik, Wit
    Denkena, Berend
    Zak, Krzysztof
    Grove, Thilo
    Bergmann, Benjamin
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 85 (9-12): : 2839 - 2845
  • [22] Prediction of cutting tool vibration and surface roughness in hard turning of AISI52100 steel
    Ambhore, Nitin
    Kamble, Dinesh
    Chinchanikar, Satish
    14TH INTERNATIONAL CONFERENCE ON VIBRATION ENGINEERING AND TECHNOLOGY OF MACHINERY (VETOMAC XIV), 2018, 211
  • [23] The Effect of Cutting Parameters on Surface Integrity in Hard Turning
    Saini, Sanjeev
    Ahuja, Inderpreet Singh
    Sharma, Vishal S.
    MECHANICAL AND AEROSPACE ENGINEERING, PTS 1-7, 2012, 110-116 : 751 - +
  • [24] Cutting parameters optimization for surface roughness during dry hard turning of EN 31 bearing steel using CBN insert
    Karthik, M. S.
    Raju, V. R.
    Reddy, K. Niranjan
    Balashanmugam, N.
    Sankar, M. R.
    MATERIALS TODAY-PROCEEDINGS, 2020, 26 : 1119 - 1125
  • [25] Process controls for surface integrity generated by hard turning
    Chaudhari, Rahul G.
    Hashimoto, Fukuo
    3RD CIRP CONFERENCE ON SURFACE INTEGRITY, 2016, 45 : 15 - 18
  • [26] Experimental investigation of cutting parameters influence on surface roughness and cutting forces in hard turning of X38CrMoV5-1 with CBN tool
    H AOUICI
    M A YALLESE
    A BELBAH
    M F AMEUR
    M ELBAH
    Sadhana, 2013, 38 : 429 - 445
  • [27] Predicting Surface White Layer in Precision Hard Turning
    Chen, Tao
    Zhang, Mingjun
    Liu, Xianli
    APPLICATION OF DIAMOND AND RELATED MATERIALS, 2011, 175 : 274 - +
  • [28] Experimental investigation of cutting parameters influence on surface roughness and cutting forces in hard turning of X38CrMoV5-1 with CBN tool
    Aouici, H.
    Yallese, M. A.
    Belbah, A.
    Ameur, M. F.
    Elbah, M.
    SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2013, 38 (03): : 429 - 445
  • [29] Analysis of the effect of part geometry and cutting parameters over tool vibration and surface integrity on hard turning
    Savella, Felipe Bertolotti
    Santos Pereira, Victor Willian
    Shiki, Sidney Bruce
    Hirata Ventura, Carlos Eiji
    Sette Antonialli, Armando Italo
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 122 (9-10): : 4065 - 4077
  • [30] Analysis of the effect of part geometry and cutting parameters over tool vibration and surface integrity on hard turning
    Felipe Bertolotti Savella
    Victor Willian Santos Pereira
    Sidney Bruce Shiki
    Carlos Eiji Hirata Ventura
    Armando Italo Sette Antonialli
    The International Journal of Advanced Manufacturing Technology, 2022, 122 : 4065 - 4077
12345