Experimental study on the characteristics of pad fluttering in a tilting pad journal bearing

被引:34
作者
Yang, SH
Kim, C
Lee, YB
机构
[1] Korea Inst Sci & Technol, Tribol Res Ctr, Seoul 130650, South Korea
[2] Doosan Heavy Ind & Construct Co Ltd, Steam Turbine Design & Engn Team, Chang Won 641792, Gyeongnam, South Korea
[3] Changwon Natl Univ, Dept Mechatron, Chang Won 641773, Gyeongnam, South Korea
关键词
fluttering characteristics; tilting pad journal bearing; incipient fluttering velocity; supply oil flow rate; self-excited vibration;
D O I
10.1016/j.triboint.2005.05.006
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The fluttering characteristics of the upper unloaded pads in a tilting pad journal bearing were studied experimentally. In order to investigate the fluttering phenomena of the pad, the absolute vibration of the pad, the relative vibration between the bearing and the shaft, and the circumferential film thickness/film pressure were measured with the variation of the supply oil flow rate, the shaft speed, and bearing load. By analyzing the circumferential distributions of the film thickness, it was identified that the film shape of the upper pad continuously alternates between the wedge shape and the diverged shape in the rotational direction while the shaft is rotating. And it was discovered that the pads tend to a representative sub-synchronous self-excited vibration exactly like classical rotor-bearing instability, defined as the oil whirl and oil whip phenomena, with the increase of rotating speed from the cascade plot of the pad. The major finding was that the incipient fluttering velocity of the pad increased with the increase of the supply oil flow rate but decreased with the increase of the bearing load. The experimental results also showed that the fluttering amplitudes of the pad can be effectively suppressed by controlling the supply oil flow rate. (c) 2005 Elsevier Ltd. All rights reserved.
引用
收藏
页码:686 / 694
页数:9
相关论文
共 18 条
[1]  
ADAMS ML, 1982, ASME ASLE JOINT LUBR, V82
[2]  
BOOSER ER, 1970, ASLE TRANS, V13, P262
[3]   A STUDY OF THE THERMAL-CHARACTERISTICS OF THE LEADING-EDGE GROOVE AND CONVENTIONAL TILTING PAD JOURNAL BEARINGS [J].
DMOCHOWSKI, W ;
BROCKWELL, K ;
DECAMILLO, S ;
MIKULA, A .
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 1993, 115 (02) :219-226
[4]  
FROUD FY, 1994, P 23 TURB MACH S TEX
[5]  
GARDNER WW, 1974, ASME, V96, P15
[6]   EXPERIMENTAL INVESTIGATION ON THERMOHYDRODYNAMIC PERFORMANCE OF LARGE TILTING-PAD JOURNAL BEARING INCLUDING THE INLET PRESSURE EFFECT [J].
HA, HC ;
KIM, KW .
JSME INTERNATIONAL JOURNAL SERIES C-DYNAMICS CONTROL ROBOTICS DESIGN AND MANUFACTURING, 1995, 38 (01) :160-166
[7]   INLET PRESSURE EFFECTS ON THE THERMOHYDRODYNAMIC PERFORMANCE OF A LARGE TILTING-PAD JOURNAL BEARING [J].
HA, HC ;
KIM, HJ ;
KIM, KW .
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 1995, 117 (01) :160-165
[8]   THE EFFECT OF DIFFERENT LUBRICATION METHODS ON THE PERFORMANCE OF A TILTING-PAD JOURNAL BEARING [J].
HARANGOZO, AV ;
STOLARSKI, TA ;
GOZDAWA, RJ .
TRIBOLOGY TRANSACTIONS, 1991, 34 (04) :529-536
[9]   INVESTIGATIONS ON LARGE TURBINE BEARINGS WORKING UNDER TRANSITIONAL CONDITIONS BETWEEN LAMINAR AND TURBULENT-FLOW [J].
HOPF, G ;
SCHULER, D .
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 1989, 111 (04) :628-634
[10]   INLET PRESSURE EFFECTS ON THE STATIC AND DYNAMIC CHARACTERISTICS OF TILTING-PAD JOURNAL BEARINGS [J].
KIM, JS ;
KIM, KW .
JSME INTERNATIONAL JOURNAL SERIES III-VIBRATION CONTROL ENGINEERING ENGINEERING FOR INDUSTRY, 1992, 35 (01) :121-127