Preparation of biomedical coating on porous titanium alloy

被引：0

作者：

Shao, Huiping ^{[1
]}

Wei, Ran ^{[1
]}

Lin, Tao ^{[1
]}

机构：

[1] Univ Sci & Technol Beijing, Adv Mat & Technol Inst, Beijing 100083, Peoples R China

来源：

ADVANCES IN CHEMICAL, MATERIAL AND METALLURGICAL ENGINEERING, PTS 1-5 | 2013年 / 634-638卷

关键词：

Titanium alloy; Gel-casting; Porosity; bioactive coating; MECHANICAL-PROPERTIES; IMPLANTS; POROSITY; FABRICATION; METAL;

D O I：

10.4028/www.scientific.net/AMR.634-638.2989

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

The porous titanium alloys containing molybdenum elements have been prepared by gel-casting methods. The composite coatings with hydroxyapatite (HAP) and TiO2 were prepared on the precursor in this study. The microstructure was examined by scanning electron microscopy (SEM) and X-ray diffraction, and part of the coatings was examined by EDS to indicate the linear distribution of HAP and TiO2. The Solid content of gel-casting of water base can reach 35%, arid porosity can reduce to 42% after sintering.

引用

页码：2989 / 2992

页数：4

共 10 条

[1] Influence of porosity on mechanical properties and in vivo response of Ti6Al4V implants [J].

Bandyopadhyay, Amit ;

Espana, Felix ;

Balla, Vamsi Krishna ;

Bose, Susmita ;

Ohgami, Yusuke ;

Davies, Neal M. .

ACTA BIOMATERIALIA, 2010, 6 (04) :1640-1648

[2] Application of Laser Engineered Net Shaping (LENS) to manufacture porous and functionally graded structures for load bearing implants [J].

Bandyopadhyay, Amit ;

Krishna, B. V. ;

Xue, Weichang ;

Bose, Susmita .

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 2009, 20 :29-34

[3] Fabrication of porous NiTi shape memory alloy for hard tissue implants by combustion synthesis [J].

Chu, CL ;

Chung, CY ;

Lin, PH ;

Wang, SD .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 366 (01) :114-119

[4] Correlation of in vitro and in vivo results of vacuum plasma sprayed titanium implants with different surface topography [J].

Endres, Stefan ;

Wilke, Monika ;

Knoell, Peter ;

Frank, Holger ;

Kratz, Marita ;

Wilke, Axel .

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 2008, 19 (03) :1117-1125

[5] Direct metal fabrication of titanium implants with tailored materials and mechanical properties using electron beam melting technology [J].

Harrysson, Ola L. A. ;

CansiZoglu, Omer ;

Marcellin-Little, Denis J. ;

Cormier, Denis R. ;

West, Harvey A., II .

MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS, 2008, 28 (03) :366-373

[6] Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting [J].

Heinl, Peter ;

Mueller, Lenka ;

Koerner, Carolin ;

Singer, Robert F. ;

Mueller, Frank A. .

ACTA BIOMATERIALIA, 2008, 4 (05) :1536-1544

[7] Low stiffness porous Ti structures for load-bearing implants [J].

Krishna, B. Vamsi ;

Bose, Susmita ;

Bandyopadhyay, Amit .

ACTA BIOMATERIALIA, 2007, 3 (06) :997-1006

[8] Porosity and mechanical properties of porous titanium fabricated by gelcasting [J].

Li Yan ;

Guo Zhimeng ;

Hao Junjie ;

Ren Shubin .

RARE METALS, 2008, 27 (03) :282-286

[9] Direct laser metal sintering as a new approach to fabrication of an isoelastic functionally graded material for manufacture of porous titanium dental implants [J].

Traini, T. ;

Mangano, C. ;

Sammons, R. L. ;

Mangano, F. ;

Macchi, A. ;

Piattelli, A. .

DENTAL MATERIALS, 2008, 24 (11) :1525-1533

[10] Biomimetic coating of laminin-apatite composite on titanium metal and its excellent cell-adhesive properties [J].

Uchida, M ;

Oyane, A ;

Kim, HM ;

Kokubo, T ;

Ito, A .

ADVANCED MATERIALS, 2004, 16 (13) :1071-+

← 1 →