Coal-bearing capacity of the Petrkovice Member (Ostrava Formation, Serpukhovian, Mississippian) of the Upper Silesian Basin (Czech Republic and Poland)

The Petrkovice Member is the basal unit of the paralic succession of the Ostrava Formation of the Upper Silesian Basin. This member is a valuable source of information about the transition from a marine basin filled with siliciclastic sediments into a paralic basin with the beginning of coal-bearing sedimentation. Models of: (1) the number of coal seams, (2) their total thickness, and (3) the coal content with respect to the total thickness of the succession were created to describe and assess the coal-bearing capacity of the Petrkovice Member. The authors present models for coal seam thicknesses exceeding either 10 or 40 cm. The coal-bearing capacity of the Petfkovice Member is very low. The average share of coal seams thicker than 0.1 m is 3%. The share of coal seams with a thickness that exceeds 0.4 m is only 1.66%. Moreover, in large areas of the basin, in the N and NE parts, the coal-bearing capacity is close to zero, because coal seams of greater thickness were detected only locally there. Based on these models and on other geological data, it is obvious that the onset of coal sedimentation was gradual and limited to particular sites showing the greatest subsidence of the basin floor. In places where minor subsidence took place, there were likely unfavorable conditions for accumulation of organic matter.