Creep behavior of oxide dispersion strengthened 8Cr-2WVTa and 8Cr-1W steels

被引：14

作者：

Shinozuka, K. ^{[1
]}

Tamura, M. ^{[1
]}

Esaka, H. ^{[1
]}

Shiba, K. ^{[2
]}

Nakamura, K. ^{[2
]}

机构：

[1] Natl Def Acad, Dept Mat Sci & Engn, Kanagawa 2398686, Japan

[2] Japan Atom Energy Agcy, Tokai, Ibaraki 3191195, Japan

来源：

JOURNAL OF NUCLEAR MATERIALS | 2009年 / 384卷 / 01期

关键词：

9CR-ODS MARTENSITIC STEEL; MECHANICAL-PROPERTIES; FERRITIC STEELS; CLADDINGS; IMPROVEMENT; ALLOYS;

D O I：

10.1016/j.jnucmat.2008.09.006

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Microstructures and creep behavior of two martensitic oxide dispersion strengthened (ODS) steels 8%Cr-2%W-0.2%V-0.1%Ta J1) and 8%Cr-1%W (J2) with finely dispersed Y2Ti2O7 have been investigated. Creep tests have been carried out at 670, 700 and 730 degrees C. Creep strength of J1 is stronger than that of any other ODS martensitic steels and the hoop strength of the ferritic ODS steel cladding. At the beginning of creep test, shrinkage was frequently observed for J1. This is one of the reasons for high creep strength of J1. The delta-ferrite, which is untransformed to austenite at hot isostatic press and hot rolling temperatures, was elongated along the rolling direction, and volume fraction of delta-ferrite in J1 is larger than J2. Although the elongated delta-ferrite affects the anisotropy of creep behavior, the extent of anisotropy in J1 is not so large as that of the ferritic ODS steel. (C) 2008 Elsevier B.V. All rights reserved.

引用

页码：1 / 5

页数：5

共 22 条

[1] Assessment of ODS-14%Cr ferritic alloy for high temperature applications [J].

Alamo, A ;

Lambard, V ;

Averty, X ;

Mathon, MH .

JOURNAL OF NUCLEAR MATERIALS, 2004, 329 :333-337

[2] Corrosion properties of oxide dispersion strengthened steels in super-critical water environment [J].

Cho, HS ;

Kimura, A ;

Ukai, S ;

Fujiwara, M .

JOURNAL OF NUCLEAR MATERIALS, 2004, 329 :387-391

[3]

Horiuchi Toshiaki., 2002, ISIJ International, V42, pS67, DOI DOI 10.2355/ISIJINTERNATIONAL.42.SUPPL_S67

[4] TEM examination of microstructural evolution during processing of 14CrYWTi nanostructured ferritic alloys [J].

Kishimoto, H ;

Alinger, MJ ;

Odette, GR ;

Yamamoto, T .

JOURNAL OF NUCLEAR MATERIALS, 2004, 329 :369-371

[5] Oxide dispersion-strengthened steels: A comparison of some commercial and experimental alloys [J].

Klueh, RL ;

Shingledecker, JP ;

Swindeman, RW ;

Hoelzer, DT .

JOURNAL OF NUCLEAR MATERIALS, 2005, 341 (2-3) :103-114

[6] Tensile and creep properties of an oxide dispersion- strengthened ferritic steel [J].

Klueh, RL ;

Maziasz, PJ ;

Kim, IS ;

Heatherly, L ;

Hoelzer, DT ;

Hashimoto, N ;

Kenik, EA ;

Miyahara, K .

JOURNAL OF NUCLEAR MATERIALS, 2002, 307 :773-777

[7] Mechanical and microstructural properties of a hipped RAFM ODS-steel [J].

Lindau, R ;

Möslang, A ;

Schirra, M ;

Schlossmacher, P ;

Klimenkov, M .

JOURNAL OF NUCLEAR MATERIALS, 2002, 307 (1 SUPPL.) :769-772

[8] Nano-mesoscopic structural characterization of 9Cr-ODS martensitic steel for improving creep strength [J].

Ohtsuka, S. ;

Ukai, S. ;

Sakasegawa, H. ;

Fujiwara, M. ;

Kaito, T. ;

Narita, T. .

JOURNAL OF NUCLEAR MATERIALS, 2007, 367 (160-165) :160-165

[9] Improvement of 9Cr-ODS martensitic steel properties by controlling excess oxygen and titanium contents [J].

Ohtsuka, S ;

Ukai, S ;

Fujiwara, M ;

Kaito, T ;

Narita, T .

JOURNAL OF NUCLEAR MATERIALS, 2004, 329 :372-376

[10] Microstructure and mechanical properties of two ODS ferritic/martensitic steels [J].

Schaeublin, R ;

Leguey, T ;

Spätig, P ;

Baluc, N ;

Victoria, M .

JOURNAL OF NUCLEAR MATERIALS, 2002, 307 (1 SUPPL.) :778-782

← 1 2 3 →