Testing of set recovery of unmodified and furfurylated densified wood by means of water storage and alternating climate tests

被引：30

作者：

Buchelt, Beate ^{[1
]}

Dietrich, Tobias ^{[1
]}

Wagenfuehr, Andre ^{[1
]}

机构：

[1] Tech Univ Dresden, Inst Wood & Paper Technol, D-01062 Dresden, Germany

来源：

HOLZFORSCHUNG | 2014年 / 68卷 / 01期

关键词：

compression wood; densification; furfurylated wood; furfuryl alcohol; modified wood; set recovery; spring-back; DEGRADATION;

D O I：

10.1515/hf-2013-0049

中图分类号：

S7 [林业];

学科分类号：

0829 ; 0907 ;

摘要：

Densification is a well-known method for improving the mechanical properties of wood. In the present study, unmodified and furfurylated wood samples were densified and submitted to cyclic water storage tests and cyclic alternating climate tests. Swelling coefficients and spring-back data were determined for the evaluation of the quality of densification. The study shows that results depend on the test method applied. Simple water storage tests do not reflect the behavior of densified wood in the high humidity range. The spring-back data of unmodified samples are more influenced by the testing method than those of the furfurylated ones.

引用

页码：23 / 28

页数：6

共 15 条

[1] Effects of semi-isostatic densification on anatomy and cellshape recovery on soaking [J].

Blomberg, Jonas ;

Persson, Bengt ;

Bexell, Ulf .

HOLZFORSCHUNG, 2006, 60 (03) :322-331

[2]

Inoue M, 2008, J TROP FOR SCI, V20, P273

[3] Compressive-molding of wood by high-pressure steam-treatment: Part 1. Development of compressively molded squares from thinnings [J].

Ito, Y ;

Tanahashi, M ;

Shigematsu, M ;

Shinoda, Y ;

Ohta, C .

HOLZFORSCHUNG, 1998, 52 (02) :211-216

[4] Evaluation on structural performance of compressed wood as shear dowel [J].

Jung, Kiho ;

Kitamori, Akihisa ;

Komatsu, Kohei .

HOLZFORSCHUNG, 2008, 62 (04) :461-467

[5]

Kamke FA, 2011, EUR J WOOD WOOD PROD, V69, P483, DOI 10.1007/s00107-010-0461-7

[6] Compression of wood under saturated steam, superheated steam, and transient conditions at 150°C, 160°C, and 170°C [J].

Kutnar, Andreja ;

Kamke, Frederick A. .

WOOD SCIENCE AND TECHNOLOGY, 2012, 46 (1-3) :73-88

[7]

Laine K, 2013, EUR J WOOD WOOD PROD, V71, P13, DOI 10.1007/s00107-012-0649-0

[8] Properties of furfurylated wood [J].

Lande, S ;

Westin, M ;

Schneider, M .

SCANDINAVIAN JOURNAL OF FOREST RESEARCH, 2004, 19 :22-30

[9]

Morsing N, 2000, Densification of Wood-The Influence of Hygrothermal Treatment on Compression of Beech Perpendicular to the Grain

[10] Effects of thermo-hydro-mechanical treatment on the structure and properties of wood [J].

Navi, P ;

Girardet, F .

HOLZFORSCHUNG, 2000, 54 (03) :287-293

← 1 2 →