THREE-DIMENSIONAL REGULARITIES OF DISTRIBUTION OF AIR-INLET CHARACTERISTIC VELOCITY IN NATURAL-DRAFT WET COOLING TOWER

被引：4

作者：

Wang Kai ^{[1
]}

Sun Feng-zhong ^{[1
]}

Zhao Yuan-bin ^{[1
]}

Gao Ming ^{[1
]}

Shi Yue-tao ^{[1
]}

机构：

[1] Shandong Univ, Sch Energy & Power Engn, Jinan 250061, Peoples R China

来源：

JOURNAL OF HYDRODYNAMICS | 2008年 / 20卷 / 03期

关键词：

cooling tower; flow field; numerical simulation; air inlet;

D O I：

10.1016/S1001-6058(08)60064-5

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

A model for heat and mass transfer in a natural-draft wet cooling tower was established. Numerical simulation with the k-epsilon turbulent model was conducted. Distribution rules of air inlet aerodynamic field were studied. Field experiments were done in a cooling tower in power plant, and the test data was compared with the related results. The definition of characteristic air velocity was proposed and its influencing factors, such as the cross-wind velocity and circumferential angle, were quantitatively studied. It can be used to evaluate the performance of cooling tower and to calculate the ventilation quantity and resistance of air inlet. It is also a theoretical basis for cooling tower design and performance optimization.

引用

页码：323 / 330

页数：8

共 30 条

[21] An improved three-dimensional numerical model of a v-bar splash fill in a wet cooling tower
Tiwari, Ankur Kumar
Jain, Sanjeev
Karmakar, Sujay
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2021, 128
[22] Flow Resistance, Velocity Distribution and Optimal Height for Air Intake in Natural Draft Cooling Towers.
Hempel, D.C.
Stephan, K.
Hesse, G.
Brennstoff-Waerme-Kraft, 1983, 35 (11): : 470 - 477
[23] FLOW RESISTANCE, VELOCITY DISTRIBUTION AND OPTIMAL HEIGHT FOR AIR INTAKE IN NATURAL DRAFT COOLING-TOWERS
HEMPEL, DC
STEPHAN, K
HESSE, G
BRENNSTOFF-WARME-KRAFT, 1983, 35 (11): : 470 - 477
[24] Numerical Study on The Three-dimensional Thermal Characteristics of Mechanical Draft High-level Water Collecting Cooling Tower
Long G.
Zhang G.
Sun F.
Chen X.
Deng W.
Zhang X.
Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2023, 43 (13): : 5078 - 5085
[25] A three-dimensional mathematical model to predict air-cooling flow and temperature distribution of wire loops in the Stelmor air-cooling system
Hong, Lingxiang
Wang, Bo
Feng, Shuai
Yang, Zhiliang
Yu, Yaowei
Peng, Wangjun
Zhang, Jieyu
APPLIED THERMAL ENGINEERING, 2017, 116 : 766 - 776
[26] Three-dimensional air distribution analysis of different outflow typed operating rooms at different inlet velocities and room temperatures
Ufat, Hande
Kaynakli, Omer
Yamankaradeniz, Nurettin
Yamankaradeniz, Recep
ADVANCES IN MECHANICAL ENGINEERING, 2017, 9 (07): : 1 - 12
[27] Three-dimensional particle-streak tracking (PST) velocity measurements of a heat exchanger inlet flow -: A new method to measure all three air-flow velocity components in a plane is applied to a steady-state three-dimensional flow
Müller, D
Müller, B
Renz, U
EXPERIMENTS IN FLUIDS, 2001, 30 (06) : 645 - 656
[28] Anti-Freezing Study of High-Level Water-Collecting Natural Draft Wet-Cooling Tower Based on Its Water Temperature Distribution Characteristics
Wang, Zhonghua
Yue, Zenggang
Wang, Wei
Ma, Chenghui
Li, Xiaoguang
Guo, Changmin
Zhao, Yuanbin
ENERGIES, 2024, 17 (03)
[29] Three-dimensional particle-streak tracking (PST) velocity measurements of a heat exchanger inlet flow A new method to measure all three air-flow velocity components in a plane is applied to a steady-state three-dimensional flowA new method to measure all three air-flow velocity components in a plane is applied to a steady-state three-dimensional flow
D. Müller
B. Müller
U. Renz
Experiments in Fluids, 2001, 30 : 645 - 656
[30] Numerical study of three-dimensional turbulent natural convection air cooling of heat sources simulating electronic components mounted in a vertical channel
Bessaih, R
Kadja, M
JOURNAL OF ENHANCED HEAT TRANSFER, 2000, 7 (03) : 153 - 166

← 1 2 3 →