Improvement in sinterability and phase stability of hydroxyapatite and partially stabilized zirconia composites

被引：32

作者：

Evis, Zafer ^{[1
]}

Usta, Metin ^{[2
]}

Kutbay, Isil ^{[2
]}

机构：

[1] Middle E Tech Univ, Dept Engn Sci, TR-06531 Ankara, Turkey

[2] Gebze Inst Technol, Dept Mat Sci & Engn, TR-41400 Gebze, Turkey

来源：

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY | 2009年 / 29卷 / 04期

关键词：

Apatite; Sintering; MgF2; Biomedical applications; MECHANICAL-PROPERTIES; THERMAL-STABILITY; DOPED ZIRCONIA; MICROSTRUCTURE;

D O I：

10.1016/j.jeurceramsoc.2008.07.020

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Composites of hydroxyapatite with partially stabilized zirconia with MgO or MgF2 were pressureless sintered between 1000 degrees C and 1300 degrees C. The reactions and transformations of phases were verified by X-ray diffraction. For the hydroxyapatite and zirconia composites with MgO, calcium from the hydroxyapatite diffused into the zirconia phase, and the hydroxyapatite decomposed to tri-calcium phosphate at sintering temperatures higher than 1000 degrees C. Above about 1200 degrees C, CaZrO3 was formed. Composites containing the MgF2 decomposed slower than the composites with MgO, which was verified by the changes in the lattice volume of the hydroxyapatite left in these composites. Fluorine ions in MgF2 diffused into hydroxyapatite, which resulted in thermal stability at high sintering temperatures. Composites with MgF2 had higher hardness than those with MgO. The lowest porosity was found in a composite initially containing 10 wt% partially stabilized zirconia and 5 wt% MgF2. (C) 2008 Elsevier Ltd. All fights reserved.

引用

页码：621 / 628

页数：8

共 35 条

[1] Phase analysis and thermal stability of hot isostatically pressed zirconia-hydroxyapatite composites [J].

Adolfsson, Erik, 2000, American Ceramic Soc, Westerville (83)

[2] Plasma spraying of zirconia-reinforced hydroxyapatite composite coatings on titanium .1. Phase, microstructure and bonding strength [J].

Chang, E ;

Chang, WJ ;

Wang, BC ;

Yang, CY .

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 1997, 8 (04) :193-200

[3]

CULLITY BD, 1978, XRAY DIFFRACTION, P411

[4] Mechanical behaviour of new zirconia-hydroxyapatite ceramic materials [J].

Delgado, JA ;

Martínez, S ;

Ginebra, MP ;

Morejón, L ;

Carlsson, N ;

Fernández, E ;

Planell, JA ;

Clavaguera-Mora, MT ;

Rodríguez-Viejo, J .

BIOCERAMICS, 2000, 192-1 :151-154

[5]

ELLIOTT JC, 1994, STRUCTURE CHEM APATI, P161

[6] Hydroxylapatite-zirconia composites:: Thermal stability of phases and sinterability as related to the CaO-ZrO2phase diagram [J].

Evis, Z ;

Ergun, C ;

Doremus, RH .

JOURNAL OF MATERIALS SCIENCE, 2005, 40 (05) :1127-1134

[7] Reactions in hydroxylapatite-zirconia composites [J].

Evis, Zafer .

CERAMICS INTERNATIONAL, 2007, 33 (06) :987-991

[8] Effect of MgF2 on hot pressed hydroxylapatite and monoclinic zirconia composites [J].

Evis, Zafer ;

Doremus, Robert H. .

JOURNAL OF MATERIALS SCIENCE, 2007, 42 (11) :3739-3744

[9] Al3+ doped nano-hydroxyapatites and their sintering characteristics [J].

Evis, Zafer .

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2006, 114 (1335) :1001-1004

[10] Increased osteoblast adhesion on nanograined hydroxyapatite and partially stabilized zirconia composites [J].

Evis, Zafer ;

Sato, Michiko ;

Webster, Thomas J. .

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A, 2006, 78A (03) :500-507

← 1 2 3 4 →