Magnetizing Inductance Determination in a Six-Phase Induction Machine

被引：2

作者：

Brkovic, Bogdan Mihailo ^{[1
]}

Ristic, Leposava Bratimir ^{[1
]}

Terzic, Mladen Vlajko ^{[1
]}

Stankovic, Ana Vladan ^{[2
]}

Lazarevic, Zoran Mileta ^{[1
]}

机构：

[1] Univ Belgrade, Sch Elect Engn, Belgrade 11000, Serbia

[2] Cleveland State Univ, Dept Elect Engn & Comp Sci, Cleveland, OH 44115 USA

来源：

IEEE TRANSACTIONS ON ENERGY CONVERSION | 2019年 / 34卷 / 02期

关键词：

Dcexcitation; finite element analysis; magnetizing inductance; no-load test; six-phase induction machine; PARAMETER-IDENTIFICATION; SYNCHRONOUS MACHINE; GENERATOR; MOTOR; WINDINGS; DESIGN;

D O I：

10.1109/TEC.2018.2881763

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

A simple offline method for measuring the magnetizing inductance of an asymmetrical six-phase induction machine is presented in this paper. The measurement procedure is based on dc excitation and it is performed at standstill. As opposed to the standard no load test, the magnetizing inductance is measured solely with the stator leakage influence significantly diminished. Additionally, the iron losses in the machine and their influence on the measurement are reduced considerably. The proposed method is applicable regardless ofwhether the neutral point of the machine is accessible or not. The method is verified through finite element analysis and experimentally. The obtained test results confirm the accuracy of the proposed approach.

引用

页码：812 / 823

页数：12

共 50 条

[21] Experimental Magnetizing Inductance Identification in Five-Phase Induction Machines
Che, H. S.
Jones, M.
Levi, E.
Riveros, J. A.
Bogado, B.
Barrero, F.
39TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY (IECON 2013), 2013, : 5179 - 5184
[22] Modelling Approaches for an Asymmetrical Six-Phase Machine
Zabaleta, M.
Levi, E.
Jones, M.
PROCEEDINGS 2016 IEEE 25TH INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS (ISIE), 2016, : 173 - 178
[23] An Advanced Disturbance Reduction Field-Oriented Control for Six-phase Induction Machine
Chinmaya, K. A.
Singh, G. K.
2018 IEEMA ENGINEER INFINITE CONFERENCE (ETECHNXT), 2018,
[24] Comparative Study of Non-linear Controllers Applied to a Six-Phase Induction Machine
Ayala, Magno
Gonzalez, Osvaldo
Rodas, Jorge
Gregor, Raul
Kali, Yassine
Wheeler, Pat
2018 IEEE INTERNATIONAL CONFERENCE ON ELECTRICAL SYSTEMS FOR AIRCRAFT, RAILWAY, SHIP PROPULSION AND ROAD VEHICLES & INTERNATIONAL TRANSPORTATION ELECTRIFICATION CONFERENCE (ESARS-ITEC), 2018,
[25] Simple circuit-oriented model for predicting six-phase induction machine performances
Aroquiadassou, G.
Henao, H.
Capolino, G. A.
Boglietti, A.
Cavagnino, A.
IECON 2006 - 32ND ANNUAL CONFERENCE ON IEEE INDUSTRIAL ELECTRONICS, VOLS 1-11, 2006, : 822 - +
[26] Direct Torque Control based on Virtual Voltage Vector for a Six-phase Induction Machine
Garcia Entrambasaguas, P.
Gonzalez-Prieto, I
Duran, M. J.
Bermudez, M.
Barrero, F.
REVISTA IBEROAMERICANA DE AUTOMATICA E INFORMATICA INDUSTRIAL, 2018, 15 (03): : 277 - 285
[27] A New Multiphase Rotor Model for the Squirrel Cage Rotor of a Six-phase Induction Machine
Dainez, Paulo S.
Bim, Edson
IECON 2018 - 44TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, 2018, : 331 - 336
[28] Six-phase induction machine operating as a stand-alone self-excited induction generator
Nounou, Kamel
Marouani, Khoudir
Benbouzid, Mohamed
Tabbache, Bekheira
2014 INTERNATIONAL CONFERENCE ON GREEN ENERGY, 2014, : 158 - 163
[29] Direct torque control technology of a six-phase induction machine based on predictive control
Li, S
Xiao, HH
Chen, HY
Cui, SH
ICMIT 2005: CONTROL SYSTEMS AND ROBOTICS, PTS 1 AND 2, 2005, 6042
[30] FAULT TOLERANT HIGH PERFORMANCE DRIVE SYSTEM USING SIX-PHASE INDUCTION MACHINE
Batista, Gilson R.
Salvadori, Fabiano
Jacobina, Cursino B.
de Freitas, Isaac S.
2013 BRAZILIAN POWER ELECTRONICS CONFERENCE (COBEP), 2013, : 786 - 792

← 1 2 3 4 5 →