Experimental investigation of heat transfer and effectiveness in corrugated plate heat exchangers having different chevron angles

被引：14

作者：

Kilic, Bayram ^{[1
]}

Ipek, Osman ^{[2
]}

机构：

[1] Mehmet Akif Ersoy Univ, Bucak Emin Gulmez Vocat Sch, Burdur, Turkey

[2] Suleyman Demirel Univ, Fac Engn, TR-32260 Isparta, Turkey

来源：

HEAT AND MASS TRANSFER | 2017年 / 53卷 / 02期

关键词：

PRESSURE-DROP; CONDENSATION; R410A; R407C;

D O I：

10.1007/s00231-016-1817-2

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

In this study, heat transfer rate and effectiveness of corrugated plate heat exchangers having different chevron angles were investigated experimentally. Chevron angles of plate heat exchangers are beta = 30A degrees and beta = 60A degrees. For this purpose, experimentally heating system used plate heat exchanger was designed and constructed. Thermodynamic analysis of corrugated plate heat exchangers having different chevron angles were carried out. The heat transfer rate and effectiveness values are calculated. The experimental results are shown that heat transfer rate and effectiveness values for beta = 60A degrees is higher than that of the other. Obtained experimental results were graphically presented.

引用

页码：725 / 731

页数：7

共 50 条

[31] Comparative evaluation of flow boiling heat transfer characteristics of R-1234ze(E) and R-134a in plate heat exchangers with different Chevron angles
Kim, Dongwoo
Lee, DongChan
Jang, Dong Soo
Jeon, Yongseok
Kim, Yongchan
APPLIED THERMAL ENGINEERING, 2018, 132 : 719 - 729
[32] Numerical investigation of small plate heat exchangers performance having different surface profiles
Mohebbi, Saeed
Veysi, Farzad
APPLIED THERMAL ENGINEERING, 2021, 188
[33] An experimental study on single phase convection heat transfer and pressure drop in two brazed plate heat exchangers with different chevron shapes and hydraulic diameters
Man Bae Kim
Chang Yong Park
Journal of Mechanical Science and Technology, 2017, 31 : 2559 - 2571
[34] An experimental study on single phase convection heat transfer and pressure drop in two brazed plate heat exchangers with different chevron shapes and hydraulic diameters
Kim, Man Bae
Park, Chang Yong
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2017, 31 (05) : 2559 - 2571
[35] Heat transfer from rotating finned heat exchangers with different orientation angles
Tawfik, Adel Abdalla
HEAT AND MASS TRANSFER, 2010, 46 (03) : 365 - 370
[36] NUMERICAL AND EXPERIMENTAL ANALYSES OF FLOW AND HEAT TRANSFER CHARACTERISTICS IN A CHEVRON-TYPE CORRUGATED PLATE HEAT EXCHANGER WITH GRAPHENE NANOFLUID
Aytac, Zeynep
HEAT TRANSFER RESEARCH, 2023, 54 (01) : 1 - 18
[37] Heat transfer from rotating finned heat exchangers with different orientation angles
Adel Abdalla Tawfik
Heat and Mass Transfer, 2010, 46 : 365 - 370
[38] Investigation on the Ammonia Boiling Heat Transfer Coefficient in Plate Heat Exchangers
Ilie, Anica
Girip, Alina
Calota, Razvan
Calin, Andreea
ENERGIES, 2022, 15 (04)
[39] Investigation of effect of oblique ridges on heat transfer in plate heat exchangers
Novosad, Jan
Dvorak, Vaclav
EFM13 - EXPERIMENTAL FLUID MECHANICS 2013, 2014, 67
[40] Heat transfer technology: Corrugated tube heat exchangers
Bhosale, R.
Chemical Engineering World, 2001, 36 (02):

← 1 2 3 4 5 →