Experimental investigation of heat transfer and effectiveness in corrugated plate heat exchangers having different chevron angles

被引：14
|
作者：
Kilic, Bayram [1 ]
Ipek, Osman [2 ]
机构：
[1] Mehmet Akif Ersoy Univ, Bucak Emin Gulmez Vocat Sch, Burdur, Turkey
[2] Suleyman Demirel Univ, Fac Engn, TR-32260 Isparta, Turkey
来源：
HEAT AND MASS TRANSFER | 2017年 / 53卷 / 02期
关键词：
PRESSURE-DROP; CONDENSATION; R410A; R407C;
D O I：
10.1007/s00231-016-1817-2
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
In this study, heat transfer rate and effectiveness of corrugated plate heat exchangers having different chevron angles were investigated experimentally. Chevron angles of plate heat exchangers are beta = 30A degrees and beta = 60A degrees. For this purpose, experimentally heating system used plate heat exchanger was designed and constructed. Thermodynamic analysis of corrugated plate heat exchangers having different chevron angles were carried out. The heat transfer rate and effectiveness values are calculated. The experimental results are shown that heat transfer rate and effectiveness values for beta = 60A degrees is higher than that of the other. Obtained experimental results were graphically presented.
引用
收藏
页码：725 / 731
页数：7
相关论文
共 50 条
  • [1] Experimental investigation of heat transfer and effectiveness in corrugated plate heat exchangers having different chevron angles
    Bayram Kılıç
    Osman İpek
    Heat and Mass Transfer, 2017, 53 : 725 - 731
  • [2] A numerical and experimental study of chevron, corrugated-plate heat exchangers
    Han, Xiao-Hong
    Cui, Li-Qi
    Chen, Shao-Jie
    Chen, Guang-Ming
    Wang, Qin
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2010, 37 (08) : 1008 - 1014
  • [3] The characteristics of condensation in brazed plate heat exchangers with different chevron angles
    Han, DH
    Lee, KJ
    Kim, YH
    JOURNAL OF THE KOREAN PHYSICAL SOCIETY, 2003, 43 (01) : 66 - 73
  • [4] Experimental investigation of heat transfer and pressure drop in cross-corrugated plate heat exchangers
    Li, YC
    Hessami, MA
    Hu, EJ
    ENERGY AND ENVIRONMENT, 1998, : 288 - 293
  • [5] Investigation of heat transfer and pressure drop in plate heat exchangers having different surface profiles
    Durmus, Aydin
    Benli, Hueseyin
    Kurtbas, Irfan
    Gul, Hasan
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2009, 52 (5-6) : 1451 - 1457
  • [6] Investigation of flow and heat transfer in corrugated-undulated plate heat exchangers
    M. Ciofalo
    I. Di Piazza
    J. A. Stasiek
    Heat and Mass Transfer, 2000, 36 : 449 - 462
  • [7] Investigation of flow and heat transfer in corrugated-undulated plate heat exchangers
    Ciofalo, M
    Di Piazza, I
    Stasiek, JA
    HEAT AND MASS TRANSFER, 2000, 36 (05) : 449 - 462
  • [8] Heat transfer during condensation in corrugated plate heat exchangers
    Shah, Mirza M.
    INTERNATIONAL JOURNAL OF REFRIGERATION, 2021, 127 : 180 - 193
  • [9] An experimental investigation of the performance of cross-corrugated plate heat exchangers
    Hessami, MA
    JOURNAL OF ENHANCED HEAT TRANSFER, 2003, 10 (04) : 379 - 393
  • [10] Heat transfer and flow resistance characteristics of plate heat exchangers with different corrugate angles
    Co-Innovation Center for Advanced Aaero-Engine, Department of Energy Engineering, Zhejiang University, Hangzhou 310027, China
    不详
    不详
    不详
    Kung Cheng Je Wu Li Hsueh Pao, 7 (1369-1373):
12345