Broad band PCB probes for near field measurements

被引：0

作者：

NimishaSivaraman ^{[1
]}

Ndagijimana, Fabien ^{[1
]}

Kadi, Moncef ^{[2
]}

Riah, Zouheir ^{[2
]}

机构：

[1] Univ Grenoble Alpes, IMEP LAHC, Grenoble, France

[2] Univ Rouen, Normandie Univ, ESIGELEC, IRSEEM, Rouen, France

来源：

2017 INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY - EMC EUROPE | 2017年

关键词：

Antenna factor; near field measurement; shielded magnetic probe; sensitivity;

D O I：

暂无

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

Thispaper presents a miniaturized near field shielded magnetic probe, fabricated using low cost printed circuit board technology. The probe performance is calibrated and validated from 1MHz - 1GHz. The probe is fabricated on an FR4 substrate of thickness 0.8mm and consists of 3 layers with the signal in the middle layer and top and bottom layers dedicated to ground planes. The aperture size of the loop is 800um x 800um. The comparison of the near field scan of the proposed probe with the conventional probe is given in the specified frequency band of operation.

引用

页数：5

共 14 条

[1]

Aoyamaa Satoshi, 2005, IEEE INT S EL COMP D

[2] Applications of the near-field techniques in EMC investigation's [J].