INFLUENCE OF FIRING CONDITIONS ON PROPERTIES OF RED CERAMIC

被引：4

作者：

Lisiane, Navarro de Lima Santana ^{[1
]}

Bartolomeu, Jorge da Silva ^{[1
]}

Wherllyson, Patricio Goncalves ^{[1
]}

Juliana, de Melo Cartaxo ^{[1
]}

Bruna, Silveira Lira ^{[1
]}

Renato, Correia dos Santos ^{[1
]}

Romualdo, Rodrigues Menezes ^{[2
]}

机构：

[1] Univ Fed Campina Grande, UFCG DEP PB, Dept Engn Mat, Aprigio Veloso 820, BR-58109970 Campina Grande, PB, Brazil

[2] Univ Fed Paraiba, BR-58059900 Joao Pessoa, Paraiba, Brazil

来源：

ADVANCED POWDER TECHNOLOGY VIII, PTS 1 AND 2 | 2012年 / 727-728卷

关键词：

clay; firing cycle; technological properties; CLAYS; TRANSFORMATIONS;

D O I：

10.4028/www.scientific.net/MSF.727-728.721

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

In the ceramic industry, the firing is one of the main stages of the production process. There are two heating rates prevailing at this stage: low heating rate (long residence time) and high heating rate (fast residence time), the low rate is more used in traditional ceramics. This study aims to evaluate the influence of firing conditions on technological properties of three compositions of clay, used in the manufacture of red ceramic products. Initially, the mixtures were characterized subsequently were extruded, dried and submitted to firing at temperatures at 900 and 1000 degrees C with heating rates of I, 2, 5, 15, 20 and 30 degrees C/min. The crystalline evolution of the different samples was analyzed using X-ray diffraction and the technological properties were determined. For the mechanical resistance, it was not observed significant change with the increase of the temperature and heat rate

引用

页码：721 / +

页数：2

共 50 条

[1] Influence of the firing conditions on the quality of ceramic decorating colours
Chmielewski, D.
Karaś, A.
Witoslawski, I.
Keramische Zeitschrift, 2001, 53 (06) : 476 - 478
[2] Effects of Firing Conditions on the Properties of Ceramic Decorations.
Oel, H.J.
Mueller, S.
CFI Ceramic Forum International, 1986, 63 (7-8): : 360 - 367
[3] Liquid suction by porous ceramic materials 4:: influence of firing conditions
Escardino, A
Beltrán, V
Barba, A
Sánchez, E
BRITISH CERAMIC TRANSACTIONS, 1999, 98 (05): : 225 - 229
[4] Influence of firing temperature on the ceramic properties of Triassic clays from Tunisia
Baccour, H.
Medhioub, M.
Jamoussi, F.
Mhiri, T.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (06) : 2812 - 2817
[5] Influence of firing conditions on ceramic products: Experimental study on clay rich in organic matter
Maritan, L
Nodari, L
Mazzoli, C
Milano, A
Russo, U
APPLIED CLAY SCIENCE, 2006, 31 (1-2) : 1 - 15
[6] Influence of firing temperature on the ceramic properties of illite-chlorite-calcitic clays
Martinez-Martinez, Sergio
Perez-Vilarejo, Luis
Garzon, Eduardo
Sanchez-Soto, Pedro J.
CERAMICS INTERNATIONAL, 2023, 49 (14) : 24541 - 24557
[7] Influence of Firing Temperature on Phase Composition and Color Properties of Ceramic Tile Bodies
Wisniewska, Kornelia
Pichor, Waldemar
Klosek-Wawrzyn, Ewelina
MATERIALS, 2021, 14 (21)
[8] Influence of features and firing temperature on the ceramic properties and phase evolution of raw kaolins
Sanchez-Soto, Pedro J.
Garcia-Garzon, Vanessa
Martinez-Martinez, Sergio
Perez-Villarejo, Luis
Sanchez-Garrido, Juan A.
Garzon, Eduardo
CONSTRUCTION AND BUILDING MATERIALS, 2025, 466
[9] Influence of the Sand Addition on the Processing, Properties and Microstructure of Red Ceramic
Fontes Vieira, Carlos Mauricio
Teixeira Queiroz, Luiz Fernando
Monteiro, Sergio Neves
ADVANCED POWDER TECHNOLOGY VII, 2010, 660-661 : 801 - 806
[10] INFLUENCE OF FIRING CONDITIONS ON METALLURGICAL PROPERTIES OF SOKOLOV-SARBAY PELLETS
ISKO, BA
PYRIKOV, AN
SPEKTOR, AN
URIN, VD
YURIN, AA
NESTEROV, GS
BIRYUKOV.NI
MARKOV, AD
GRABKO, LS
RUSSIAN METALLURGY-METALLY-USSR, 1971, 1972 (03): : 4 - &

← 1 2 3 4 5 →