Effect of Austenitization Temperature on Microstructure and Mechanical Properties of B1500HS Boron Steel in the Hot Stamping

被引：3
|
作者：
He, Lianfang [1 ]
Li, Huiping [1 ]
Wang, Cheng [1 ]
机构：
[1] Shandong Univ Sci & Technol, Sch Mat Sci & Engn, Qingdao 266590, Peoples R China
来源：
INTERNATIONAL SYMPOSIUM ON MATERIALS APPLICATION AND ENGINEERING (SMAE 2016) | 2016年 / 67卷
关键词：
Hot stamping; Austenitization temperature; Microstructure; Mechanical properties; 22MNB5;
D O I：
10.1051/matecconf/20166703001
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
In the paper, a typical part of B1500HS boron steel was formed using the hot stamping tools, and the effect of austenitization temperature on the microstructure and mechanical properties of B1500HS boron steel was studied. The results show that, the temperature of steel plate has a significant effect on the temperature of hot stamping tools, and the temperature of punch rises at a faster speed than that of die in the hot stamping process. The austenitization temperature has a significant effects on the size of martensite. The cooling rate of steel plate has a significant effect on the tensile strength when the austenitization temperature is 870 degrees C. The fracture of sample austenitized at 870 degrees C or 900 degrees C is the dimple, the fracture of sample austenitized at 930 degrees C or 960 degrees C is the mixture of quasicleavage and dimple.
引用
收藏
页数：7
相关论文
共 50 条
  • [21] Analysis of phase transformation and blanking accuracy of B1500HS steel during hot blanking
    Hou, Hongli
    Li, Huiping
    He, Lianfang
    Tang, Bingtao
    INTERNATIONAL CONFERENCE ON THE TECHNOLOGY OF PLASTICITY, ICTP 2017, 2017, 207 : 1540 - 1545
  • [22] Microstructure and Properties of a New Cr – Mn Steel without Boron Additions for Use in Hot Stamping
    H. Zhou
    G. Zhu
    Q. Li
    Q. Chen
    Metal Science and Heat Treatment, 2015, 57 : 339 - 343
  • [23] Effect of Coiling Temperature on Microstructure and Mechanical Properties of 500 MPa Grade Hot Stamping Axle Housing Steel
    Hui Yajun
    Liu Kun
    Wu Kemin
    Li Qiuhan
    Niu Tao
    Wu Qiaoling
    ACTA METALLURGICA SINICA, 2020, 56 (12) : 1605 - 1616
  • [24] Effects of different process parameters on mechanical properties and microstructures of hot stamping boron steel
    Wei Chen
    Yitao Zhu
    Long Chen
    Fenghua Chen
    Bo Liu
    The International Journal of Advanced Manufacturing Technology, 2021, 114 : 939 - 948
  • [25] Effects of different process parameters on mechanical properties and microstructures of hot stamping boron steel
    Chen, Wei
    Zhu, Yitao
    Chen, Long
    Chen, Fenghua
    Liu, Bo
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 114 (3-4) : 939 - 948
  • [26] Effect of Dies Temperature on Mechanical Properties of Hot Stamping Square-cup Part for Ultra High Strength Steel
    Lei, Chengxi
    Xing, Zhongwen
    Fu, Hongya
    MATERIALS AND MANUFACTURING TECHNOLOGY, PTS 1 AND 2, 2010, 129-131 : 390 - 394
  • [27] Description of microstructures and mechanical properties of boron alloy steel in hot stamping process
    Namklang, P.
    Uthaisangsuk, V.
    JOURNAL OF MANUFACTURING PROCESSES, 2016, 21 : 87 - 100
  • [28] Microstructure and properties of hot stamping boron steel using heated dies under different holding time
    Li, Chenchen
    Xie, Silu
    VACUUM, 2019, 170
  • [29] Constitutive Model and Flow Behavior of B1500HS High-Strength Steel During the Hot Deformation Process
    Li, Muyu
    Duan, Yongchuan
    Yao, Dan
    Guan, Yingping
    Yang, Liu
    METALS, 2020, 10 (01)
  • [30] Effect of austenitization temperature on microstructure, crystallographic aspects, and mechanical properties of AISI 420 martensitic stainless steel
    de Moura, Ariane Neves
    Favarato, Luciana Nascimento Oliveira
    Amorim, Dirceni de Souza Costa
    Alcantara, Claudio Moreira de
    Marques, Murilo Carmelo Satolo
    Orlando, Marcos Tadeu D. 'Azeredo
    Vieira, Estefano Aparecido
    Labiapari, Wilian da Silva
    da Cunha, Marco Antonio
    de Oliveira, Tarcisio Reis
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 909
12345