Wood fibre reinforced cement matrix: a micromechanical based approach

被引：0

作者：

Beltran, M. G. Sierra ^{[1
]}

Schlangen, E. ^{[1
]}

机构：

[1] Delft Univ Technol, Fac Civil Engn & Geosci, M&E, Microlab, NL-2600 GA Delft, Netherlands

来源：

ADVANCES IN FRACTURE AND DAMAGE MECHANICS VII | 2008年 / 385-387卷

关键词：

Wood fibre; cement matrix; micromechanics; microcracking; ductility;

D O I：

暂无

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

In this paper a micromechanics-based design is proposed for the development of a material with enhanced ductility and flexural strength combined with low production cost. The composite performance is described by 11 micromechanical properties of the system consisting of cement matrix, fibres and fibre-matrix interface. Most of these properties are defined through laboratory tests. A strain-hardening behaviour with multiple microcracks prior to failure is is the goal for the composite with enhanced ductility. The amount and size of the fibres needed for bridging the microcracks as well as the composition of the cement matrix will be determined in order to achieve this behaviour.

引用

页码：445 / 448

页数：4

共 50 条

[31] Effect of limestone powder on fracture and flexural benaviour of PVA fibre-reinforced sulfoaluminate cement [J].

Li, Yuelin ;

Deng, Dehua ;

Sierens, Zeger ;

Zhao, Xuefang ;

Li, Jiabin .

MAGAZINE OF CONCRETE RESEARCH, 2020, 72 (24) :1243-1259

[32] Experimental Evaluation of Carbon Reinforced TRC with Cement Suspension Matrix at Elevated Temperature [J].

Fuerst, Richard ;

Hejtmanek, Petr ;

Vlach, Tomas ;

Repka, Jakub ;

Mozer, Vladimir ;

Hajek, Petr .

POLYMERS, 2022, 14 (11)

[33] A micromechanical approach to the strength criterion of Drucker-Prager materials reinforced by rigid inclusions [J].

Barthélémy, JF ;

Dormieux, L .

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS, 2004, 28 (7-8) :565-582

[34] Use of Cement Suspension as an Alternative Matrix Material for Textile-Reinforced Concrete [J].

Furst, Richard ;

Fuerst, Eliska ;

Vlach, Tomas ;

Repka, Jakub ;

Pokorny, Marek ;

Mozer, Vladimir .

MATERIALS, 2021, 14 (09)

[35] Thermodynamically consistent elastoplastic phase-field fracture model for micromechanical analysis of fibre-reinforced polymer composites [J].

Sagar, Shiv ;

Tiwari, Ayush Kumar ;

Chowdhury, Shubhankar Roy .

COMPOSITE STRUCTURES, 2025, 357

[36] FINITE-ELEMENT MICROMECHANICAL MODELING OF UNIDIRECTIONAL FIBER-REINFORCED METAL-MATRIX COMPOSITES [J].

LI, DS ;

WISNOM, MR .

COMPOSITES SCIENCE AND TECHNOLOGY, 1994, 51 (04) :545-563

[37] Thermal expanding behavior of carbon nanotube-reinforced metal matrix nanocomposites-A micromechanical modeling [J].

Hassanzadeh-Aghdam, Mohammad Kazem ;

Ansari, Reza ;

Mahmoodi, Mohammad Javad .

JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 744 :637-650

[38] Controlling fracture toughness of matrix with mica flake inclusions to design pseudo-ductile fibre reinforced cementitious composites [J].

Mihashi, H. ;

Leite, Jodo P. de Barros ;

Yamakoshi, S. ;

Kawamata, A. .

ENGINEERING FRACTURE MECHANICS, 2007, 74 (1-2) :210-222

[39] Micromechanical modeling of the cyclic behavior of Sn-0.7Cu solder based on micromechanical polycrystalline approach [J].

Liu, Lu ;

Yao, Yao .

2017 18TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2017, :197-202

[40] Enhancing the performance of light-frame wood studs using glass fibre-reinforced polymers [J].

Lacroix, D. ;

Viau, C. ;

Battelli, E. ;

Doudak, G. .

ENGINEERING STRUCTURES, 2021, 245

← 1 2 3 4 5 →