A comparative study on the tribological behavior of Ti-6Al-4V and Ti-24Nb-4Zr-8Sn alloys in simulated body fluid

被引：14

作者：

Injetia, V. S. Y. ^{[1
]}

Nune, K. C. ^{[1
]}

Reyes, E. ^{[1
]}

Yue, G. ^{[1
]}

Li, S. J. ^{[2
]}

Misra, R. D. K. ^{[1
]}

机构：

[1] Univ Texas El Paso, Dept Met Mat & Biomed Engn, El Paso, TX 79968 USA

[2] Chinese Acad Sci, Inst Mat Res, Shenyang, Liaoning, Peoples R China

来源：

MATERIALS TECHNOLOGY | 2019年 / 34卷 / 05期

关键词：

Wear; coefficient of friction; tangential force; titanium alloy; debris; CORROSION BEHAVIOR; TITANIUM-ALLOYS; WEAR PROPERTIES; MICROSTRUCTURE EVOLUTION; COCRMO ALLOY; TRIBOCORROSION; FRICTION; DEFORMATION; TOXICITY; CONTACT;

D O I：

10.1080/10667857.2018.1550138

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The objective of the study is to assess the tribological behavior of Ti-24Nb-4Zr-8Sn (beta-type microstructure) alloy in terms of coefficient of friction and tangential force and compare it with Ti-6Al-4V (alpha+beta-type microstructure) alloy for joint prostheses. The coefficient of friction (mu) was weakly dependent on load for both the alloys, but tangential force increased with load. On the other hand, the coefficient of friction was independent of sliding velocity but was slightly greater for Ti2448 alloy. Higher hardness and higher strain hardening capacity of Ti64 alloy attributed to marginally superior wear resistance in comparison to Ti2448 alloy. The morphology of wear track on Ti64 alloy represented a rough appearance with grooves and scratches, indicating the mode of wear was abrasive. On Ti2448 alloy, scratches along the wear track with islands of microscopically smooth oxide layers flaking off from the surface indicated a mixed mode of wear including abrasive and adhesive.

引用

页码：270 / 284

页数：15

共 50 条

[21] Wear and corrosion behaviour of Ti-13Nb-13Zr and Ti-6Al-4V alloys in simulated physiological solution
Cvijovic-Alagic, I.
Cvijovic, Z.
Mitrovic, S.
Panic, V.
Rakin, M.
CORROSION SCIENCE, 2011, 53 (02) : 796 - 808
[22] Fretting corrosion behaviour of Ti-6Al-4V/PMMA contact in simulated body fluid
Mischler, S.
Barril, S.
Landolt, D.
TRIBOLOGY-MATERIALS SURFACES & INTERFACES, 2009, 3 (01) : 16 - 23
[23] Biomimetic Hydroxyapatite Growth on Functionalized Surfaces of Ti-6Al-4V and Ti-Zr-Nb Alloys
Pylypchuk, Ie V.
Petranovskaya, A. L.
Gorbyk, P. P.
Korduban, A. M.
Markovsky, P. E.
Ivasishin, O. M.
NANOSCALE RESEARCH LETTERS, 2015, 10
[24] Wear characteristics of Ti-Nb-Ta-Zr and Ti-6Al-4V alloys for biomedical applications
Li, SJ
Yang, R
Li, S
Hao, YL
Cui, YY
Niinomi, M
Guo, ZX
WEAR, 2004, 257 (9-10) : 869 - 876
[25] On the Influence of Thermal History on the Martensitic Transformation in Ti-24Nb-4Zr-8Sn (wt%)
Church, N. L.
Talbot, C. E. P.
Jones, N. G.
SHAPE MEMORY AND SUPERELASTICITY, 2021, 7 (01) : 166 - 178
[26] Amelioration of the tribological behaviour of carbon/Ti-6Al-4V and graphite/Ti-6Al-4V couples by plasma nitriding of the titanium alloy
Sylvestre, M.
Zaidi, H.
Riviere, J. P.
Eyidi, D.
Doyen, F.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2010, 224 (J9) : 979 - 988
[27] Tribological behavior study on Ti-Nb-Sn/hydroxyapatite composites in simulated body fluid solution
Chen Yuyong
Wang Xiaopeng
Xu Lijuan
Liu Zhiguang
Woo, Kee Do
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2012, 10 : 97 - 107
[28] Metallurgical and mechanical properties of Ti-24Nb-4Zr-8Sn alloy fabricated by metal injection molding
Kafkas, Firat
Ebel, Thomas
JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 617 : 359 - 366
[29] The interdependence of the thermal and mechanical cycling behaviour in Ti2448 (Ti-24Nb-4Zr-8Sn, wt%)
Church, N. L.
Talbot, C. E. P.
Connor, L. D.
Michalik, S.
Jones, N. G.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 889
[30] Tribological Behavior of Borided Ti6Al4V Alloy under Simulated Body Fluid Conditions
Kaplan, Y.
Isitan, A.
ACTA PHYSICA POLONICA A, 2018, 134 (01) : 271 - 274

← 1 2 3 4 5 →