A comparative study on the tribological behavior of Ti-6Al-4V and Ti-24Nb-4Zr-8Sn alloys in simulated body fluid

被引：19
作者：
Injetia, V. S. Y. [1 ]
Nune, K. C. [1 ]
Reyes, E. [1 ]
Yue, G. [1 ]
Li, S. J. [2 ]
Misra, R. D. K. [1 ]
机构：
[1] Univ Texas El Paso, Dept Met Mat & Biomed Engn, El Paso, TX 79968 USA
[2] Chinese Acad Sci, Inst Mat Res, Shenyang, Liaoning, Peoples R China
来源：
MATERIALS TECHNOLOGY | 2019年 / 34卷 / 05期
关键词：
Wear; coefficient of friction; tangential force; titanium alloy; debris; CORROSION BEHAVIOR; TITANIUM-ALLOYS; WEAR PROPERTIES; MICROSTRUCTURE EVOLUTION; COCRMO ALLOY; TRIBOCORROSION; FRICTION; DEFORMATION; TOXICITY; CONTACT;
D O I：
10.1080/10667857.2018.1550138
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The objective of the study is to assess the tribological behavior of Ti-24Nb-4Zr-8Sn (beta-type microstructure) alloy in terms of coefficient of friction and tangential force and compare it with Ti-6Al-4V (alpha+beta-type microstructure) alloy for joint prostheses. The coefficient of friction (mu) was weakly dependent on load for both the alloys, but tangential force increased with load. On the other hand, the coefficient of friction was independent of sliding velocity but was slightly greater for Ti2448 alloy. Higher hardness and higher strain hardening capacity of Ti64 alloy attributed to marginally superior wear resistance in comparison to Ti2448 alloy. The morphology of wear track on Ti64 alloy represented a rough appearance with grooves and scratches, indicating the mode of wear was abrasive. On Ti2448 alloy, scratches along the wear track with islands of microscopically smooth oxide layers flaking off from the surface indicated a mixed mode of wear including abrasive and adhesive.
引用
收藏
页码：270 / 284
页数：15
相关论文
共 50 条
[1]   Electrochemical and surface analyses of nanostructured Ti-24Nb-4Zr-8Sn alloys in simulated body solution [J].
Li, J. ;
Li, S. J. ;
Hao, Y. L. ;
Huang, H. H. ;
Bai, Y. ;
Hao, Y. Q. ;
Guo, Z. ;
Xue, J. Q. ;
Yang, R. .
ACTA BIOMATERIALIA, 2014, 10 (06) :2866-2875
[2]   Tribological Behaviour of Orthopaedic Ti-13Nb-13Zr and Ti-6Al-4V Alloys [J].
Cvijovic-Alagic, I. ;
Cvijovic, Z. ;
Mitrovic, S. ;
Rakin, M. ;
Veljovic, D. ;
Babic, M. .
TRIBOLOGY LETTERS, 2010, 40 (01) :59-70
[3]   Corrosion behavior of biomedical Ti-24Nb-4Zr-8Sn alloy in different simulated body solutions [J].
Bai, Y. ;
Hao, Y. L. ;
Li, S. J. ;
Hao, Y. Q. ;
Yang, R. ;
Prima, F. .
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 2013, 33 (04) :2159-2167
[4]   Electrochemical corrosion behavior of Ti-24Nb-4Zr-8Sn alloy in a simulated physiological environment [J].
Bai, Y. ;
Li, S. J. ;
Prima, F. ;
Hao, Y. L. ;
Yang, R. .
APPLIED SURFACE SCIENCE, 2012, 258 (08) :4035-4040
[5]   Tribological Behaviour of Orthopaedic Ti-13Nb-13Zr and Ti-6Al-4V Alloys [J].
I. Cvijović-Alagić ;
Z. Cvijović ;
S. Mitrović ;
M. Rakin ;
Đ. Veljović ;
M. Babić .
Tribology Letters, 2010, 40 :59-70
[6]   Texture investigation of the superelastic Ti-24Nb-4Zr-8Sn alloy [J].
Yang, Y. ;
Castany, P. ;
Cornen, M. ;
Thibon, I. ;
Prima, F. ;
Gloriant, T. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 591 :85-90
[7]   The effect of oxygen on α" martensite and superelasticity in Ti-24Nb-4Zr-8Sn [J].
Obbard, E. G. ;
Hao, Y. L. ;
Talling, R. J. ;
Li, S. J. ;
Zhang, Y. W. ;
Dye, D. ;
Yang, R. .
ACTA MATERIALIA, 2011, 59 (01) :112-125
[8]   Comparative study of nitrogen implantation effect on mechanical and tribological properties of Ti-6Al-4V and Ti-10Zr-10Nb-5Ta alloys [J].
Carquigny, Stephanie ;
Takadoum, Jamal ;
Ivanescu, Steliana .
EUROPEAN PHYSICAL JOURNAL-APPLIED PHYSICS, 2019, 85 (02)
[9]   Effect of precipitation on mechanical properties in the β-Ti alloy Ti-24Nb-4Zr-8Sn [J].
Coakley, James ;
Rahman, Khandaker M. ;
Vorontsov, Vassili A. ;
Ohnuma, Masato ;
Dye, David .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 655 :399-407
[10]   Plastic Deformation Behavior of Biomedical Ti-24Nb-4Zr-8Sn Single Crystal Alloy [J].
Zhang Jinrui ;
Zhang Yanwei ;
Hao Yulin ;
Li Shujun ;
Yang Rui .
ACTA METALLURGICA SINICA, 2017, 53 (10) :1385-1392
12345