Ultimate strength analysis of a bulk carrier hull girder under alternate hold loading condition - A case study Part 1: Nonlinear finite element modelling and ultimate hull girder capacity

This is the first of two companion papers dealing with nonlinear finite element modelling and analysis of the ultimate strength of a bulk carrier hull girder under alternate hold loading (AHL) condition. The purpose is to contribute to establishing rational ultimate longitudinal strength criteria for the hull girder under combined loading. The focus is on the hogging condition. An important issue is the significant double bottom bending in empty holds in AHL due to combined global hull girder bending moment and local loads. The local loads may substantially reduce the strength of the hull girder. Different AHL conditions, i.e. fully loaded cargo and (partially) heavy cargo are considered. A critical review of external and internal design pressures for different AHL conditions is accomplished using both CSR-BC rules and DNV rules. A methodology for nonlinear finite element modelling of hold tanks of a bulk carrier under AHL is presented by use of ABAQUS. A mesh convergence study is carried out in order to find the appropriate mesh for the model. The implication of using different design pressures on the hull girder strength is assessed. The FE results can be used as a basis for establishing simplified methods applicable to practical design of ship hulls under combined loadings. This issue is discussed in the companion paper. (C) 2008 Elsevier Ltd. All rights reserved.