Effective elastic constants of two-dimensional cellular materials with deep and thick cell walls

被引:22
作者
Kim, HS
Al-Hassani, STS
机构
[1] Yonsei Univ, Dept Biomed Engn, Res Inst Med Instruments & Rehabil Engn, Wonju 220710, Kangwon Do, South Korea
[2] UMIST, Dept Mech Aerosp & Mfg Engn, Manchester M60 1QD, Lancs, England
关键词
cellular materials; deep and thick cell walls; elastic constants; joint stiffening effect; generalised plane strain;
D O I
10.1016/j.ijmecsci.2004.02.002
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
In order to analyse the elastic constants of cellular materials with deep and thick cell walls, finite element analysis using two kinds of unit cell approach (stiffness matrix method and compliance matrix method) is performed which is applicable to any orthotropic cellular materials. Comparison between results from the FEA, the theories presented in this paper and experiments of previous investigators indicate that the elastic constants of cellular materials with thick cell walls depend not only on the relative density but also on the joint stiffening effect. Approximate formulae under generalised plane strain conditions are also presented for the purpose of obtaining the effective elastic constants for cellular materials with deep and thick cell walls. A satisfactory agreement was found with experimental results obtained on a deep and thick cellular material. The results indicate that the previous models in which the wall of cellular materials is treated as a simple beam are not adequate to evaluate the effective elastic constants of cellular materials with deep and thick cell walls. In addition, considerable attention needs for the measurement of effective Young's modulus of square cellular materials in the two soft directions because it is strongly affected by misalignment errors. (C) 2004 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1999 / 2016
页数:18
相关论文
共 22 条
  • [1] Ashby M. F., 1997, CELLULAR SOLIDS STRU, DOI DOI 10.1017/CBO9781139878326
  • [2] Effect of imperfections on the yielding of two-dimensional foams
    Chen, C
    Lu, TJ
    Fleck, NA
    [J]. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 1999, 47 (11) : 2235 - 2272
  • [3] Isotropic constitutive models for metallic foams
    Deshpande, VS
    Fleck, NA
    [J]. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 2000, 48 (6-7) : 1253 - 1283
  • [4] FAILURE SURFACES FOR CELLULAR MATERIALS UNDER MULTIAXIAL LOADS .1. MODELING
    GIBSON, LJ
    ASHBY, MF
    ZHANG, J
    TRIANTAFILLOU, TC
    [J]. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 1989, 31 (09) : 635 - 663
  • [5] THE MECHANICS OF TWO-DIMENSIONAL CELLULAR MATERIALS
    GIBSON, LJ
    ASHBY, MF
    SCHAJER, GS
    ROBERTSON, CI
    [J]. PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 1982, 382 (1782): : 25 - 42
  • [6] GIBSON LJ, 1981, THESIS CAMBRIDGE U
  • [7] Influence of wavy imperfections in cell walls on elastic stiffness of cellular solids
    Grenestedt, JL
    [J]. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 1998, 46 (01) : 29 - 50
  • [8] Gulati ST., 1975, 750171 SAE
  • [9] Survival probability for brittle honeycombs with plateau borders under uniaxial compression
    Huang, JS
    Chen, TW
    [J]. ACTA MECHANICA, 2003, 164 (1-2) : 61 - 74
  • [10] Jones R., 2018, Mechanics of composite materials