Effect of multiple DBD plasma actuators on the tip leakage flow structure and loss of a turbine cascade

In this paper, the effects of multiple dielectric barrier discharge (DBD) plasma actuators on the leakage flow structures and loss conditions have been numerically studied in an axial turbine cascade. Kriging surrogate model is adopted to obtain the optimal cases. The physical mechanism of flow structures inside the gap that control leakage flow is presented, which is obtained by analyzing the flow topology, the evolution of the flow structures and its influence on the secondary velocity and loss conditions in the passage as well. The results show that the induced vortex caused by DBD actuators can change the leakage flow direction inside the tip gap and make the separation bubble break earlier, leading to a new type of the flow pattern. When the actuators are applied, the speed of leakage flow is significantly reduced and the angle between leakage flow and main flow has an obviously diminution, causing the reduction of mixing losses in the passage compared with the Baseline case. Furthermore, the comparison of secondary velocity shows that the tip leakage vortex (TLV) approaches the suction surface, resulting in reduced affected area and weakened loss strength. Plasma actuators can diminish the loss coefficient in both TLV and passage vortex near the casing (PVC) zones. The actuators arranged near the trailing edge mainly affect the strength of TLV, while the actuators in the leading edge area contribute to the loss reduction in the zone of PVC.