Surface integrity and fatigue analysis of shot-peening for 7055 aluminum alloy under different high-speed milling conditions

被引：9

作者：

Yao, ChangFeng ^{[1
]}

Dou, XingTang ^{[1
]}

Wu, Daoxia ^{[1
]}

Zhou, Zheng ^{[1
]}

Zhang, JiYin ^{[1
]}

机构：

[1] Northwestern Polytech Univ, Key Lab Contemporary Design & Integrated Mfg Tech, Minist Educ, Box 552, Xian 710072, Shaanxi, Peoples R China

来源：

ADVANCES IN MECHANICAL ENGINEERING | 2016年 / 8卷 / 10期

基金：

中国国家自然科学基金;

关键词：

7055 aluminum alloy; shot peening; surface integrity; fatigue life; high-speed milling; RESIDUAL-STRESSES; CYCLE FATIGUE; STRENGTH; STEEL; PREDICTION; STABILITY; LAYER;

D O I：

10.1177/1687814016674628

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

To study the effect of different milled surfaces on shot peening surface integrity (roughness, residual stress, hardness, and microstructure), research on the change of surface integrity is carried out using the same shot peening process for different milling surfaces of 7055-T77 aluminum alloy. Surface integrity measurements, fatigue fracture analysis, and fatigue life tests are conducted to reveal the effect of surface integrity on crack initiation and fatigue life. The results show that shot peening can reduce the dispersion and instability of surface integrity brought by milling processing, although it increases the surface roughness; the maximum residual compressive stress and depth of residual stress layer increase significantly after shot peening, and the residual stress and hardening distribution are very good; larger surface roughness and irregular surface scratches of milling samples before shot peening easily lead to cracks and gouges produced on shot peening surface.

引用

页码：1 / 10

页数：10

共 23 条

[11] Stability of shot peen residual stresses in IN100 subjected to creep and fatigue loading
John, Reji
Buchanan, Dennis J.
Caton, Michael J.
Jha, Sushant K.
[J]. FATIGUE 2010, 2010, 2 (01): : 1887 - 1893
[12] Improvement of Fatigue Strength of Maraging Steel by Shot Peening
Kawagoishi, N.
Nagano, T.
Moriyama, M.
Kondo, E.
[J]. MATERIALS AND MANUFACTURING PROCESSES, 2009, 24 (12) : 1431 - 1435
[13] Application of the FEM for the prediction of the surface layer characteristics after shot peening
Klemenza, M.
Schulze, V.
Rohr, I.
Loehe, D.
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (08) : 4093 - 4102
[14] Effects of laser peening treatment on high cycle fatigue properties of degassing-processed cast aluminum alloy
Masaki, Kiyotaka
Ochi, Yasuo
Matsumura, Takashi
Sano, Yuji
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 468 : 171 - 175
[15] Numerical modelling of shot peening process and corresponding products: Residual stress, surface roughness and cold work prediction
Mylonas, G. I.
Labeas, G.
[J]. SURFACE & COATINGS TECHNOLOGY, 2011, 205 (19) : 4480 - 4494
[16] The effect of machined topography and integrity on fatigue life
Novovic, D
Dewes, RC
Aspinwall, DK
Voice, W
Bowen, P
[J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2004, 44 (2-3) : 125 - 134
[17] Evaluating surface deformation and near surface strain hardening resulting from shot peening a tempered martensitic steel and application to low cycle fatigue
Soady, K. A.
Mellor, B. G.
West, G. D.
Harrison, G.
Morris, A.
Reed, P. A. S.
[J]. INTERNATIONAL JOURNAL OF FATIGUE, 2013, 54 : 106 - 117
[18] Tosha K, 2006, T NONFERR METAL SOC, V16, pS230
[19] Wagner L., 1992, Materials and Manufacturing Processes, V7, P423, DOI 10.1080/10426919208947430
[20] Surface integrity and fatigue behavior in shot-peening for high-speed milled 7055 aluminum alloy
Yao, Changfeng
Ma, Lufei
Du, Yongxia
Ren, Junxue
Zhang, Dinghua
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2017, 231 (02) : 243 - 256

← 1 2 3 →