Optimization of HSC Compressive Strength by Taguchi Method

被引：1
作者：
Hashemi, Seyed Hamid [1 ]
Soleymani, Abed [2 ]
机构：
[1] Arak Univ, Dept Civil Engn, Arak, Iran
[2] Shahid Abbaspoor Univ, Fac Engn, Tehran, Iran
来源：
SUSTAINABLE DEVELOPMENT OF URBAN INFRASTRUCTURE, PTS 1-3 | 2013年 / 253-255卷
关键词：
High Strength Concrete; Taguchi method; Orthogonal Array;
D O I：
10.4028/www.scientific.net/AMM.253-255.572
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
High strength concrete (HSC) has large application because of good performance and high durability. Optimizing mix proportions has main effect on the compressive strength of HSC. In this paper, optimizing mix proportions are investigated by Taguchi method, factors of water to cementitious material ratio (W/C), fine aggregate to total aggregate ratio (FI/AG), silica fume as supplementary cementitious material and cementitious material content were selected at three levels. After testing L-9 orthogonal array and analyzing results by Taguchi method, the best optimized mix levels were predicted by Taguchi. Then optimum mix was constructed and tested. It was concluded Taguchi forecast is true about optimized mix levels.
引用
收藏
页码：572 / +
页数：2
相关论文
共 50 条
[41]   Optimization of the production of thiocarbohydrazide using the Taguchi method [J].
Zhou, Jiancheng ;
Wu, Dongfang ;
Guo, Dongsheng .
JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY, 2010, 85 (10) :1402-1406
[42]   Green Strength Optimization of Injection Molding Process for Novel Recycle Binder System Using Taguchi Method [J].
Ibrahim, Mohd Halim Irwan ;
Kamarudin, Nur Hafizah ;
Kamarudin, Noor Hasliza .
INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 2020, 12 (04) :182-190
[43]   Taguchi Method Optimization for PCB Lamination Process [J].
Tu, Kuo-Yang ;
Li, Min-Hui .
NEXT WAVE IN ROBOTICS, 2011, 212 :178-185
[44]   Optimization of Binder Jetting Using Taguchi Method [J].
Sanjay Shrestha ;
Guha Manogharan .
JOM, 2017, 69 :491-497
[45]   Optimum sustainable mix proportions of high strength concrete by using Taguchi method [J].
Warda, M. A. ;
Khalil, H. S. ;
Ahmad, Seleem S. E. ;
Mandi, I. M. .
FRATTURA ED INTEGRITA STRUTTURALE, 2020, (54) :211-225
[46]   Wettability optimization analysis of lead-free solders with Taguchi method [J].
Liang Zhang ;
Lei Sun ;
Ji-guang Han ;
Yong-huan Guo .
Journal of Materials Science: Materials in Electronics, 2015, 26 :2605-2608
[47]   Evaluation of compressive and split tensile strength of slag based aluminosilicate geopolymer reinforced by waste polymeric materials using Taguchi method [J].
Khezrloo, Amirreza ;
Tayebi, Morteza ;
Shafiee, Abbas ;
Aghaie, Alireza .
MATERIALS RESEARCH EXPRESS, 2021, 8 (02)
[48]   BIONIC FAN OPTIMIZATION BASED ON TAGUCHI METHOD [J].
Chen, Shuming ;
Wang, Dengfeng ;
Sun, Shaoming .
ENGINEERING APPLICATIONS OF COMPUTATIONAL FLUID MECHANICS, 2011, 5 (03) :302-314
[49]   Optimization of Robotic Spray Painting process Parameters using Taguchi Method [J].
Chidhambara, K. V. ;
Shankar, B. Latha ;
Vijaykumar .
INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND MANUFACTURING APPLICATIONS (ICONAMMA-2017), 2018, 310
[50]   Multi-objective Design Optimization of the DPMSM Using RSM, Taguchi Method, and Improved Taguchi Method [J].
Cui, Junguo ;
Mei, Lianpeng ;
Xiao, Wensheng ;
Liu, Zhanpeng .
JOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY, 2024, 19 (03) :1343-1357
12345