Optimization of HSC Compressive Strength by Taguchi Method

被引：1
作者：
Hashemi, Seyed Hamid [1 ]
Soleymani, Abed [2 ]
机构：
[1] Arak Univ, Dept Civil Engn, Arak, Iran
[2] Shahid Abbaspoor Univ, Fac Engn, Tehran, Iran
来源：
SUSTAINABLE DEVELOPMENT OF URBAN INFRASTRUCTURE, PTS 1-3 | 2013年 / 253-255卷
关键词：
High Strength Concrete; Taguchi method; Orthogonal Array;
D O I：
10.4028/www.scientific.net/AMM.253-255.572
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
High strength concrete (HSC) has large application because of good performance and high durability. Optimizing mix proportions has main effect on the compressive strength of HSC. In this paper, optimizing mix proportions are investigated by Taguchi method, factors of water to cementitious material ratio (W/C), fine aggregate to total aggregate ratio (FI/AG), silica fume as supplementary cementitious material and cementitious material content were selected at three levels. After testing L-9 orthogonal array and analyzing results by Taguchi method, the best optimized mix levels were predicted by Taguchi. Then optimum mix was constructed and tested. It was concluded Taguchi forecast is true about optimized mix levels.
引用
收藏
页码：572 / +
页数：2
相关论文
共 50 条
  • [21] Optimization of GMAW Protocols and Parameters for Improving Weld Strength Quality Applying the Taguchi Method
    Achebo, Joseph I.
    WORLD CONGRESS ON ENGINEERING, WCE 2011, VOL I, 2011, : 667 - 670
  • [22] Fuzzy logic modeling of compressive strength of high-strength concrete (HSC) with supplementary cementitious material
    Aggarwal, Paratibha
    Aggarwal, Yogesh
    Siddique, Rafat
    Gupta, Sakshi
    Garg, Harshit
    JOURNAL OF SUSTAINABLE CEMENT-BASED MATERIALS, 2013, 2 (02) : 128 - 143
  • [23] Optimization of sizing parameters with taguchi method
    Sabir, Emel Ceyhun
    Sarpkaya, Cigdem
    INDIAN JOURNAL OF FIBRE & TEXTILE RESEARCH, 2016, 41 (01) : 73 - 77
  • [24] Optimization of Catalytic Bromination of Acetophenones Using Taguchi's Method
    Jangir, Nidhi
    Sohu, Saneha
    Bagaria, Surendra Kumar
    Kumar, Kartik
    Pareek, Kapil
    Jangid, Dinesh Kumar
    CHEMISTRYSELECT, 2023, 8 (20):
  • [25] Optimization of Variables Influencing the Thermal Conductivity and Fracture Strength of Reinforced PMMA by Using the Taguchi Method
    Kul, Esra
    Yesildal, Faruk
    Mandev, Emre
    Celik, Cafer
    MATERIALE PLASTICE, 2020, 57 (03) : 137 - 146
  • [26] Optimization of early flexural strength of pavement concrete with silica fume and fly ash by the Taguchi method
    Hinislioglu, S
    Bayrak, OÜ
    CIVIL ENGINEERING AND ENVIRONMENTAL SYSTEMS, 2004, 21 (02) : 79 - 90
  • [27] Influences of Parameters on Slump Flow and Compressive Strength Properties of Aluminosilicate Based Flowable Geopolymer Concrete Using Taguchi Method
    Jithendra, C.
    Elavenil, S.
    SILICON, 2020, 12 (03) : 595 - 602
  • [28] Optimization of Atterberg limits of treated expansive soils with Taguchi method
    Gobena, Jemal Aliy
    Kumar, G.
    Suppiah, S.
    MATERIALS TODAY-PROCEEDINGS, 2021, 43 : 2127 - 2133
  • [29] Influences of Parameters on Slump Flow and Compressive Strength Properties of Aluminosilicate Based Flowable Geopolymer Concrete Using Taguchi Method
    C. Jithendra
    S. Elavenil
    Silicon, 2020, 12 : 595 - 602
  • [30] Sensitivity of compressive strength of HSC to hot-dry climate, curing regimes, and additives
    Alsayed, SH
    ACI MATERIALS JOURNAL, 1997, 94 (06) : 472 - 477
12345