Optimization of HSC Compressive Strength by Taguchi Method

被引：1
作者：
Hashemi, Seyed Hamid [1 ]
Soleymani, Abed [2 ]
机构：
[1] Arak Univ, Dept Civil Engn, Arak, Iran
[2] Shahid Abbaspoor Univ, Fac Engn, Tehran, Iran
来源：
SUSTAINABLE DEVELOPMENT OF URBAN INFRASTRUCTURE, PTS 1-3 | 2013年 / 253-255卷
关键词：
High Strength Concrete; Taguchi method; Orthogonal Array;
D O I：
10.4028/www.scientific.net/AMM.253-255.572
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
High strength concrete (HSC) has large application because of good performance and high durability. Optimizing mix proportions has main effect on the compressive strength of HSC. In this paper, optimizing mix proportions are investigated by Taguchi method, factors of water to cementitious material ratio (W/C), fine aggregate to total aggregate ratio (FI/AG), silica fume as supplementary cementitious material and cementitious material content were selected at three levels. After testing L-9 orthogonal array and analyzing results by Taguchi method, the best optimized mix levels were predicted by Taguchi. Then optimum mix was constructed and tested. It was concluded Taguchi forecast is true about optimized mix levels.
引用
收藏
页码：572 / +
页数：2
相关论文
共 50 条
  • [1] Application of Taguchi method for compressive strength optimization of tertiary blended self-compacting mortar
    Teimortashlu, E.
    Dehestani, M.
    Jalal, M.
    CONSTRUCTION AND BUILDING MATERIALS, 2018, 190 : 1182 - 1191
  • [2] Using the Taguchi method to optimize the compressive strength of geopolymer mortars
    My Ngoc-Tra Lam
    INTERNATIONAL JOURNAL OF ADVANCED AND APPLIED SCIENCES, 2020, 7 (08): : 1 - 10
  • [3] Optimisation of Processing Parameters of Titanium Foams Using Taguchi Method for Compressive Strength
    Ahmad, Sufizar
    Muhamad, Norhamidi
    Muchar, Andanastuti
    Sahari, Jaafar
    Jamaludin, K. R.
    Ibrahim, M. H. I.
    Nor, N. H. Mohamad
    ADVANCED PRECISION ENGINEERING, 2010, 447-448 : 671 - +
  • [4] Compressive strength of vanadium titanium magnetite hot briquette based on taguchi method
    Zhao, Wei
    Chu, Man-Sheng
    Tang, Ya-Ting
    Tang, Jue
    Dongbei Daxue Xuebao/Journal of Northeastern University, 2015, 36 (10): : 1441 - 1444
  • [5] Optimization of tensile strength in TIG welding using the Taguchi method and analysis of variance (ANOVA)
    Naik, A. Balaram
    Reddy, A. Chennakeshava
    THERMAL SCIENCE AND ENGINEERING PROGRESS, 2018, 8 : 327 - 339
  • [6] Optimization of Post-Fire Residual Compressive Strenghth of Concrete by Taguchi Method
    Rahim, A.
    Sharma, U. K.
    Murugesan, K.
    Sharma, A.
    Arora, P.
    JOURNAL OF STRUCTURAL FIRE ENGINEERING, 2012, 3 (02) : 169 - 180
  • [7] Parametric Effects on Slump and Compressive Strength Properties of Geopolymer Concrete using Taguchi Method
    Jithendra, C.
    Elavenil, S.
    INTERNATIONAL JOURNAL OF ENGINEERING, 2021, 34 (03): : 629 - 635
  • [8] Influence of various design parameters on compressive strength of geopolymer concrete: A parametric study by taguchi method
    Raj S.R.
    Arulraj P.G.
    Anand N.
    Balamurali K.
    Gokul G.
    International Journal of Engineering, Transactions A: Basics, 2021, 34 (10): : 2351 - 2359
  • [9] Production geopolymers by Portland cement: Designing the main parameters' effects on compressive strength by Taguchi method
    Nazari, Ali
    Khanmohammadi, Hamid
    Amini, Mohammad
    Hajiallahyari, Hadi
    Rahimi, Ali
    MATERIALS & DESIGN, 2012, 41 : 43 - 49
  • [10] Influence of Various Design Parameters on Compressive Strength of Geopolymer Concrete: A Parametric Study by Taguchi Method
    Raj, S. R.
    Arulraj, P. G.
    Anand, N.
    Balamurali, K.
    Gokul, G.
    INTERNATIONAL JOURNAL OF ENGINEERING, 2021, 34 (10): : 2351 - 2358
12345