Influence of addition of Grp/Al2O3p with SiCp on wear properties of aluminum alloy 6061-T6 hybrid composites via friction stir processing

被引：136

作者：

Devaraju, A. ^{[1
]}

Kumar, A. ^{[1
]}

Kotiveerachari, B. ^{[1
]}

机构：

[1] Natl Inst Technol, Dept Mech Engn, Warangal 506004, Andhra Pradesh, India

来源：

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2013年 / 23卷 / 05期

关键词：

aluminum alloy; hybrid composite; friction stir processing; wear; solid lubricant; microstructure; SURFACE; NI;

D O I：

10.1016/S1003-6326(13)62593-5

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Aluminum alloy base surface hybrid composites were fabricated by incorporating with mixture of (SiC+Gr) and (SiC+Al2O3) particles of 20 mu m in average size on an aluminum alloy 6061-T6 plate using friction stir processing (FSP). Microstructures of both the surface hybrid composites revealed that SiC, Gr and Al2O3 are uniformly dispersed in the nugget zone (NZ). It was observed that the addition of Gr particles rather than Al2O3 particles with SiC particles, decreases the microhardness but immensely increases the dry sliding wear resistance of aluminum alloy 6061-T6 surface hybrid composite. The observed microhardness and wear properties are correlated with microstructures and worn micrographs.

引用

页码：1275 / 1280

页数：6

共 19 条

[1]

[Anonymous], 1979, METALS HDB

[2] Producing Ultrafine-Grained AZ91 from As-Cast AZ91 by FSP [J].

Asadi, P. ;

Givi, M. K. Besharati ;

Faraji, G. .

MATERIALS AND MANUFACTURING PROCESSES, 2010, 25 (11) :1219-1226

[3]

Budinski K.G., 1988, SURFACE ENG WEAR RES

[4]

Clyne T.W., 1993, INTRO METAL MATRIX C

[5] Forming Nanocrystalline Surface Layers in Copper Using Friction Stir Processing [J].

Dehghani, K. ;

Mazinani, M. .

MATERIALS AND MANUFACTURING PROCESSES, 2011, 26 (07) :922-925

[6]

Devaraju A., 2011, Int J Adv Res Mech Eng, V1, P62

[7] Tribological behavior of self-lubricating aluminium/SiC/graphite hybrid composites synthesized by the semi-solid powder-densification method [J].

Guo, MLT ;

Tsao, CYA .

COMPOSITES SCIENCE AND TECHNOLOGY, 2000, 60 (01) :65-74

[8]

Gupta M., 1990, Materials and Manufacturing Processes, V5, P165, DOI 10.1080/10426919008953242

[9] Friction stir processing technology: A review [J].

Ma, Z. Y. .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2008, 39A (03) :642-658

[10] Laser Surface Alloying of Aluminum (AA1200) with Ni and SiC Powders [J].

Mabhali, L. A. B. ;

Pityana, S. L. ;

Sacks, N. .

MATERIALS AND MANUFACTURING PROCESSES, 2010, 25 (12) :1397-1403

← 1 2 →