The Influence of Stacking Fault Energy on Compression Test of Cu and Cu-Al Alloys

被引：17

作者：

Yang Hao ^{[1
]}

Wu Xiao-Xiang ^{[1
]}

San Xing-Yuan ^{[1
]}

Shen Li ^{[1
]}

Zhu Xin-Kun ^{[1
]}

机构：

[1] Kunming Univ Sci & Technol, Dept Mat Sci & Engn, Kunming 650093, Peoples R China

来源：

IUMRS INTERNATIONAL CONFERENCE IN ASIA 2011 | 2012年 / 36卷

关键词：

Cu-Al alloy; stacking fault energy; compression test; deformation twinning; dynamic recovery; WORK-HARDENING BEHAVIOR; DEFORMATION; MECHANISMS; EVOLUTION; COPPER; SLIP;

D O I：

10.1016/j.proeng.2012.03.045

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

Compression tests of Cu-2.2wt% Al, Cu-4.5 wt% Al and Cu-6.9 wt% Al with different stacking fault energy were carried out. The effect of stacking fault energy upon Cu-Al alloys has been investigated. Optical micrographs of the samples have shown the existence of deformation twinning. With the decrease of stacking fault energy, more deformation twins have appeared in the plastic deformation process of FCC metals. The appearance of the deformation twinning and the improvement of plasticity lead to the inhibition of deformation mechanism which is dominated by the dynamic recovery of alloy. (C) 2011 Published by Elsevier Ltd. Selection and/or peer-review under responsibility of MRS-Taiwan

引用

页码：307 / 315

页数：9

共 24 条

[11] Modeling the strain hardening response of low SFE FCC alloys [J].

Kalidindi, SR .

INTERNATIONAL JOURNAL OF PLASTICITY, 1998, 14 (12) :1265-1277

[12]

KOCKS U F, 1981, AIME MET C SER, V46, P151

[13] FORMATION OF DEFORMATION TWINS IN FCC CRYSTALS [J].

MAHAJAN, S ;

CHIN, GY .

ACTA METALLURGICA, 1973, 21 (10) :1353-1363

[14] KINETICS OF FLOW AND STRAIN-HARDENING [J].

MECKING, H ;

KOCKS, UF .

ACTA METALLURGICA, 1981, 29 (11) :1865-1875

[15] NEW OBSERVATIONS ON THE MECHANISMS OF DYNAMIC STRAIN AGING AND OF JERKY FLOW [J].

MULFORD, RA ;

KOCKS, UF .

ACTA METALLURGICA, 1979, 27 (07) :1125-1134

[16] The influence of stacking fault energy on the mechanical behavior of Cu and Cu-Al alloys: Deformation twinning, work hardening, and dynamic recovery [J].

Rohatgi, A ;

Vecchio, KS ;

Gray, GT .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2001, 32 (01) :135-145

[17]

ROMHANJI E, 1992, GRAIN SIZE ALLOYING, P110

[18] STRENGTHENING IN MULTIPHASE (MP35N) ALLOY .1. AMBIENT-TEMPERATURE DEFORMATION AND RECRYSTALLIZATION [J].

SINGH, RP ;

DOHERTY, RD .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1992, 23 (01) :307-319

[19] Nanoscale structural refinement via deformation twinning in face-centered cubic metals [J].

Tao, N. R. ;

Lu, K. .

SCRIPTA MATERIALIA, 2009, 60 (12) :1039-1043

[20] Micro structural parameters from X-ray diffraction peak broadening [J].

Ungár, T .

SCRIPTA MATERIALIA, 2004, 51 (08) :777-781

← 1 2 3 →