Flexural-torsional buckling analysis of composite beams by BEM including shear deformation effect

被引:23
|
作者
Sapountzakis, E. J. [1 ]
Dourakopoulos, J. A. [1 ]
机构
[1] Natl Tech Univ Athens, Sch Civil Engn, Inst Struct Anal & Seism Res, GR-15780 Athens, Greece
关键词
flexural-torsional buckling; Timoshenko beam; nonuniform torsion; warping; flexural; bar; composite beam; twist; boundary element method; shear deformation;
D O I
10.1016/j.mechrescom.2008.06.007
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
In this paper, a boundary element method is developed for the general flexural-torsional linear buckling analysis of Timoshenko beams of arbitrarily shaped composite cross-section. The composite beam consists of materials in contact, each of which can surround a finite number of inclusions. The materials have different elasticity and shear moduli with same Poisson's ratio and are firmly bonded together. The beam is subjected to a compressive centrally applied load together with arbitrarily axial, transverse and/or torsional distributed loading, while its edges are restrained by the most general linear boundary conditions. The resulting boundary value problem, described by three coupled ordinary differential equations, is solved employing a boundary integral equation approach. Besides the effectiveness and accuracy of the developed method, a significant advantage is that the method can treat composite beams of both thin and thick walled cross-sections taking into account the warping along the thickness of the walls, while the displacements as well as the stress resultants are computed at any cross-section of the beam using the respective integral representations as mathematical formulae. All basic equations are formulated with respect to the principal shear axes coordinate system, which does not coincide with the principal bending one in a nonsymmetric cross-section. To account for shear deformations, the concept of shear deformation coefficients is used. Six coupled boundary value problems are formulated with respect to the transverse displacements, to the angle of twist, to the primary warping function and to two stress functions and solved using the analog equation method, a BEM based method. Several beams are analysed to illustrate the method and demonstrate its efficiency. The significant influence of the boundary conditions and the shear deformation effect on the buckling load are investigated through examples with great practical interest. (C) 2008 Elsevier Ltd. All rights reserved.
引用
收藏
页码:497 / 516
页数:20
相关论文
共 50 条
  • [21] Flexural-Torsional Buckling of H-Beams with Corrugated Webs
    Zhang, Zhe
    Li, Guoqiang
    Sun, Feifei
    ADVANCES IN STRUCTURES, PTS 1-5, 2011, 163-167 : 351 - +
  • [22] Flexural-torsional buckling of stepped beams subjected to pure bending
    Jong Sup Park
    Young-Jong Kang
    KSCE Journal of Civil Engineering, 2004, 8 (1) : 75 - 82
  • [23] Finite element formulation for thin-walled open composite beams including the effect of flexural and torsional shear deformation
    Vargas, P. E.
    Onate, E.
    Oller, S.
    REVISTA INTERNACIONAL DE METODOS NUMERICOS PARA CALCULO Y DISENO EN INGENIERIA, 2014, 30 (04): : 238 - 246
  • [24] Flexural-torsional buckling of fiber-reinforced plastic composite cantilever I-beams
    Qiao, PZ
    Zou, GP
    Davalos, JF
    COMPOSITE STRUCTURES, 2003, 60 (02) : 205 - 217
  • [25] Non-linear flexural-torsional dynamic analysis of beams of arbitrary cross section by BEM
    Sapountzakis, E. J.
    Dikaros, I. C.
    INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, 2011, 46 (05) : 782 - 794
  • [26] FLEXURAL-TORSIONAL BUCKLING OF ARCHES - DISCUSSION
    DABROWSKI, R
    JOURNAL OF STRUCTURAL ENGINEERING-ASCE, 1989, 115 (01): : 242 - 243
  • [27] Approximate analysis of flexural-torsional buckling strength using flange flexural buckling strength a discussion on the design formulas for beam-column flexural-torsional buckling
    Tsuda, Keigo
    Kido, Masae
    Kobayashi, Masanori
    Journal of Structural and Construction Engineering, 2012, 77 (678): : 1309 - 1318
  • [28] Flexural-Torsional Buckling Analysis of Steel Beams under Transverse Loads in High Temperature
    Wang, Zhenqing
    Li, Jialei
    Han, Yulai
    Ju, Zhu
    BIOTECHNOLOGY, CHEMICAL AND MATERIALS ENGINEERING II, PTS 1 AND 2, 2013, 641-642 : 432 - 435
  • [29] FLEXURAL-TORSIONAL BUCKLING OF INTERBRACED COLUMNS
    MEDLAND, IC
    ENGINEERING STRUCTURES, 1979, 1 (03) : 131 - 138
  • [30] FLEXURAL-TORSIONAL BUCKLING OF MONOSYMMETRIC ARCHES
    TRAHAIR, NS
    PAPANGELIS, JP
    JOURNAL OF STRUCTURAL ENGINEERING-ASCE, 1987, 113 (10): : 2271 - 2288