Effect of Microstructure on Mechanical Properties of 316 LN Austenitic Stainless Steel

被引：6
作者：
Fang, Kewei [1 ]
Luo, Kunjie [1 ]
Wang, Li [1 ]
机构：
[1] Suzhou Nucl Power Res Inst, Suzhou 215004, Peoples R China
来源：
COATINGS | 2022年 / 12卷 / 10期
关键词：
316; LNSS; Charpy impact; HBW hardness; precipitates; twin structure; CREEP DEFORMATION; RUPTURE BEHAVIOR; FLOWING SODIUM; TEMPERATURE; NITROGEN;
D O I：
10.3390/coatings12101461
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The microstructure development of 316 LN austenitic stainless steel (316 LNSS) during the aging process is investigated in this article. The thermal aging processes were conducted at 750 degrees C with different periods ranging from 50 to 500 h. The metallographic results show that the coherent and incoherent twins were present in the original 316 LNSS grains, but dwindled as the aging period increased. After 50 h of aging, many fine, dispersed particles precipitated from the matrix, which were identified as M23C6 by energy dispersive spectrometer (EDS) and transmission electron microscopy (TEM). Additionally, the impact toughness and Brinell hardness (HBW) changed during the aging, which was closely related to the effects of dispersion strengthening and solution strengthening. A negatively linear relationship between Brinell hardness and Charpy impact energy was established, which could be utilized to predict the degree of thermal embrittlement.
引用
收藏
页数：11
相关论文
共 36 条
[1]   Effects of precipitated phases on the magnetic properties of 2304 duplex stainless steel [J].
Alinejad, Hossein ;
Abbasi, Majid .
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2021, 537
[2]   Influence of 40% Cold Working and Annealing on Precipitation in AISI 316L Austenitic Stainless Steel [J].
Bartova, Katarina ;
Domankova, Maria ;
Barta, Jozef ;
Pastier, Peter .
MATERIALS, 2022, 15 (18)
[3]   Characterization of carbide particle-reinforced 316L stainless steel fabricated by selective laser melting [J].
Bhowmik, Ayan ;
Zhai, Wengang ;
Zhou, Wei ;
Nai, Sharon Mui Ling .
MATERIALS CHARACTERIZATION, 2021, 179
[4]   The effect of post-processing heat treatment on the microstructure, residual stress and mechanical properties of selective laser melted 316L stainless steel [J].
Chao, Qi ;
Thomas, Sebastian ;
Birbilis, Nick ;
Cizek, Pavel ;
Hodgson, Peter D. ;
Fabijanic, Daniel .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 821
[5]   Varied sub-grain microstructure impacts fracture behavior and resistance in 316LN weld metal [J].
Dai Keshun ;
Zhu Li ;
Xiao Wenkai ;
Chen Fangyu ;
Zhang Fuju ;
Yang Xue ;
Mudi Kunqi ;
Zhai Xian ;
Zhang Mingxiang .
ENGINEERING FRACTURE MECHANICS, 2017, 176 :100-115
[6]   Effect of Annealing Temperature on the Microstructure and Mechanical Properties of High-Pressure Torsion-Produced 316LN Stainless Steel [J].
Dong, Yuanyuan ;
Zhang, Zhe ;
Yang, Zhihai ;
Zheng, Ruixiao ;
Chen, Xu .
MATERIALS, 2022, 15 (01)
[7]   Effects of long-term thermal aging on elevated temperature deformation behaviors of wrought 316LN stainless steel by small punch test [J].
Fan, Y. ;
Han, H. G. ;
Bao, J. Y. ;
Wang, X. Y. ;
Hong, C. ;
Liu, T. G. ;
Lu, Y. H. ;
Shoji, T. .
MATERIALS CHARACTERIZATION, 2021, 182
[8]   Environmental Fatigue Behavior of a Z3CN20.09M Stainless Steel in High Temperature Water [J].
Fang, Kewei ;
Luo, Kunjie ;
Wang, Li ;
Li, Chengtao ;
Wang, Lei ;
Qiao, Yanxin .
COATINGS, 2022, 12 (03)
[9]   Influence of particle size on surface oxide of 316L stainless steel powders for hot isostatic pressing [J].
Fleischmann, Benoit ;
Chateau-Cornu, Jean-Philippe ;
Dembinski, Lucas ;
Gyss, Olivier ;
Bigot, Regis ;
Danlos, Yoann ;
Ghanbaja, Jaafar .
MATERIALIA, 2022, 22
[10]   Investigation of M7C3, M23C6 and M3C carbides synthesized on austenitic stainless steel and carbon fibers using laser metal deposition [J].
Gorunov, A. I. .
SURFACE & COATINGS TECHNOLOGY, 2020, 401
1234