Porous anodic film formation on Al-Ti alloys in sulphuric acid

被引：15

作者：

Nettikaden, V. C. ^{[1
]}

Liu, H. ^{[1
]}

Skeldon, P. ^{[1
]}

Thompson, G. E. ^{[1
]}

机构：

[1] Univ Manchester, Sch Mat, Ctr Corros & Protect, Manchester M13 9PL, Lancs, England

来源：

CORROSION SCIENCE | 2012年 / 57卷

基金：

英国工程与自然科学研究理事会;

关键词：

Aluminium; Titanium; RBS; TEM; Anodic films; RUTHERFORD BACKSCATTERING; OXIDE LAYERS; GROWTH; OXIDATION; BEHAVIOR; ALUMINUM; SPECTROSCOPY; TRANSITION; EFFICIENCY; BREAKDOWN;

D O I：

10.1016/j.corsci.2011.12.035

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Anodizing of Al-Ti alloys, containing 3, 12, 15, 30 and 45 at.%Ti, is examined at 5 mA cm(-2) in 1 mol dm(-3) sulphuric acid at 293 K. Porous films are formed up to 15 at.%Ti, with titanium increasing the anodizing voltage and pore size. In contrast, a barrier-type film is formed at 30 at.%Ti, with a finely porous outer region, while at 45 at.%Ti, barrier-type film growth is accompanied by oxygen generation. Ti:Al atomic ratios in the films are similar to those in the respective alloys. Reduced levels of sulphur occur in barrier-type films compared with porous films. (C) 2011 Elsevier Ltd. All rights reserved.

引用

页码：49 / 55

页数：7

共 50 条

[31] Formation of porous Al particles by anisotropic anodic etching [J].

Yanagishita, Takashi ;

Imaizumi, Masahiko ;

Kondo, Toshiaki ;

Masuda, Hideki .

ELECTROCHEMISTRY COMMUNICATIONS, 2017, 78 :26-28

[32] Barrier-type anodic film formation on an Al-3.5 wt% Cu alloy [J].

Paez, MA ;

Foong, TM ;

Ni, CT ;

Thompson, GE ;

Shimizu, K ;

Habazaki, H ;

Skeldon, P ;

Wood, GC .

CORROSION SCIENCE, 1996, 38 (01) :59-72

[33] Pore Morphology of Porous Al-Ti Alloy Fabricated by Continuous Casting in Hydrogen Atmosphere [J].

Kim, T. B. ;

Tane, M. ;

Suzuki, S. ;

Nakajima, H. .

MATERIALS TRANSACTIONS, 2010, 51 (10) :1871-1877

[34] Effect of surface orientation on reactive wetting of sapphire by Al-Ti alloys at 1273 K [J].

Sui, Ran ;

Chang, Jinghuan ;

Lin, Qiaoli .

MATERIALS CHEMISTRY AND PHYSICS, 2022, 285

[35] Formation of protective anodic oxides on aluminium by low voltage anodising in sulphuric acid with cerium nitrate and tartaric acid additions [J].

Curioni, M. ;

Zuleta, A. A. ;

Correa, E. ;

Pan, X. ;

Baron-Wiechec, A. ;

Skeldon, P. ;

Castano, J. G. ;

Echeverria, F. ;

Thompson, G. E. .

TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING, 2012, 90 (06) :290-297

[36] Microstructure and Mechanical Properties of SiC Joint Brazed by Al-Ti Alloys as Filler Metal [J].

Xu Puhao ;

Zhang Xiangzhao ;

Liu Guiwu ;

Zhang Mingfen ;

Gui Xinyi ;

Qiao Guanjun .

JOURNAL OF INORGANIC MATERIALS, 2022, 37 (06) :683-+

[37] Effect of elemental powder blending ratio on combustion foaming behavior of porous Al-Ti intermetallics and Al3Ti/Al composites [J].

Kobashi, Makoto ;

Inoguchi, Norio ;

Kanetake, Naoyuki .

INTERMETALLICS, 2010, 18 (05) :1039-1045

[38] Effect of Al-Ti Master Alloy on the Grain Refinement and Hot Tearing of AZ91 Mg Alloys [J].

Davis, T. A. ;

Bichler, L. .

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (06) :2577-2586

[39] Corrosion resistant Ti alloy for sulphuric acid medium: Suitability of Ti-Mo alloys [J].

Balusamy, T. ;

Jamesh, M. ;

Kumar, Satendra ;

Narayanan, T. S. N. Sankara .

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2012, 63 (09) :803-806

[40] Ellipsometric Study of Anodic Oxide Films on Alloys of the Ti–Al System [J].

A. N. Kamkin ;

L. A. Fishgoit ;

N. G. Bukhan'ko ;

V. I. Portnov ;

V. A. Safonov .

Russian Journal of Electrochemistry, 2001, 37 :1140-1148

← 1 2 3 4 5 →